Unsupported release: VSE/POWER 8.2 APARs for z/VSE V4.2

Last update: Apr 26, 2012

APAR
Date
PTF Contents
DY47363
2012/03/21
HIPER
UD53817-01C Deadlock between TCP/IP and VSE/POWER stops spooling
DY47310
2012/02/20
UD53763-01C
UD53765-01G
Duplicate $SPLnnnn not handled correctly
DY47313
2011/08/19
UD53757-01C
DY47260
2011/08/04
UD53702-01C
UD53701-01G

LEVELSET
Message 1Q2CI names IPW$$CPF as failing phase erroneously.
DY47237
2010/11/25
UD53678-01C
DY47151
2010/09/30
UD53602-01C IPWSEGM KEEP=YES does not clear previously defined CMPACT, FLASH & FNO
DY47127
2010/08/12
UD53584-01C VSE/POWER DEL queue keeps former Master queue entries when last Duplicate was deleted while Master queue entry was active.
DY47168
2010/06/02
UD53617-01C
UD53618-01G
The current PTF brings the following functionality:
"SET CONFIRM=PDELETE,RDR" autostart statement is allowed for the specification. When "SET CONFIRM=PDELETE,RDR" is specified then VSE/POWER will ask 1QZ3D confirmation for any "PDELETE RDR,..." command issued by local console operator.
DY47116
2010/05/19
UD53566-01C VSE/POWER is in a loop when more than 500 entries in EXPDAYS are processed by PALTER LST,ALL,EXPDAYS=nnn command.
DY47093
2010/02/09
UD53549-01C
UD53548-01G

LEVELSET
VSE/POWER AUTOSTART does not continue if "PDISPLAY ALL|RDR|LST|PUN,FULL=YES" fails due to VSE/AF console buffer shortage. Message 1Q12I is not issued then.
DY47143
2010/02/08
UD53598-01C
UD53599-01G
PNET with TCP/IP fails to connect if IP-hostname (got from Network Definition Table and by GETHOSTBYADDR macro) has character(s) in different case
DY47095
2010/02/05
UD53547-01C DISPATCHABLE JOBS DO NOT START IN VSE/POWER SHARED SPOOLING ENVIRONMENT WITH ACTIVE PNET TRANSMITTER
DY47092
2010/01/25
UD53538-01C
DY47133
2009/12/22
UD53583-01C POFFLOAD SAVE,CRDAYS command leaves unsaved entries in the inaccessible state DISP=*
DY47124
2009/11/17
UD53568-01C VSE/POWER command PDISPLAY A,PART doesn't show job start time & date.
DY47043
2009/10/15
UD53500-01C FCB is ignored when old POFFLOAD / Spool tapes are printed directly.
DY47008
2009/08/19
UD53474-01C
UD53476-01G
PNET msg 1RTLI internal problem occurred. IDUMP in IPW$$TD. The connection was closed.
DY47049
2009/04/06
UD53493-01C VSE/POWER doesn't issue 1V24I message (which includes sense data of negative response from remote RJE workstation) on the local console.
DY46922
2008/11/21
UD53364-01C PDISPLAY STATUS shows wrong number of queue entries in the delayed deletion
DY46965
2008/09/18
UD53401-01C Using * $$ DATA to insert a JECL statement with more than 71 characters fails with '1F00 LABEL NOT FOUND, EOF REACHED'
DY46901
2008/09/23
UD53342-01C Miscellaneous fixes for z/VSE 4.2.0

 

VSE/POWER 8.2 components

Comp. ID CLC Description
5686-CF8-03 01C VSE/POWER 8.2
5686-CF8-03 01G VSE/POWER 8.2 Macros

 

Unsupported release: VSE/POWER 8.1 APARs for z/VSE V4.1

Last update: December 9, 2010

APAR
Date
PTF Contents
DY47211
2010/11/02
UD53666-91C IPWSEGM KEEP=YES macro for output with active LSTDUP|PUNDUP does not produce duplicates
DY47212
2010/09/29
UD53659-91C IPWSEGM KEEP=YES does not clear previously defined CMPACT, FLASH & FNO
DY47126
2010/08/10
UD53576-91C VSE/POWER DEL queue keeps former Master queue entries when last Duplicate was deleted while Master queue entry was active.
DY47169
2010/05/05
UD53619-91C
UD53562-91G
VSE/POWER is in a loop when more than 500 entries in EXPDAYS are processed by PALTER LST,ALL,EXPDAYS=nnn command.
DY47166
2010/04/09
UD53612-91C
UD53611-91G

LEVELSET
PDISPLAY RDR,ALL,FULL=YES as 1ST AUTOSTART STATEMENT After FORMAT=NO Terminates VSE/POWER STARTUP with MSG1Q75I
DY47109
2010/03/25
UD53556-91C
UD53562-91G
PNET with TCP/IP fails to connect if IP-hostname (got from Network Definition Table and by GETHOSTBYADDR macro) has character(s) in different case
DY47106
2010/03/24
UD53554-91C
UD53555-91G
The current PTF brings the following functionality:
"SET CONFIRM=PDELETE,RDR" autostart statement is allowed for the specification. When "SET CONFIRM=PDELETE,RDR" is specified then VSE/POWER will ask 1QZ3D confirmation for any "PDELETE RDR,..." command issued by local console operator.
DY47108
2010/03/19
UD53553-91C
DY47094
2010/02/05
UD53546-91C DISPATCHABLE JOBS DO NOT START IN VSE/POWER SHARED SPOOLING ENVIRONMENT WITH ACTIVE PNET TRANSMITTER
DY47131
2009/12/15
UD53574-91C POFFLOAD SAVE,CRDAYS command leaves unsaved entries in the inaccessible state DISP= *
DY47067
2009/11/13
UD53509-91C VSE/POWER command PDISPLAY A,PART doesn't show job start time & date.
DY47016
2009/08/27
UD53478-91C
UD53479-91G
PNET msg 1RTLI internal problem occurred. IDUMP in IPW$$TD. The connection was closed.
DY47048
2009/04/03
UD53487-91C VSE/POWER doesn't issue 1V24I message (which includes sense data of negative response from remote RJE workstation) on the local console.
DY46962
2008/08/27
UD53396-91C
DY46870
2008/06/30
UD53297-91C
UD53298-91G
DY46841
2008/04/22
UD53347-91C
DY46849
2008/01/15
UD53303-91C
UD53304-91G
When datafile extension is started it may fail with message 1QD3A and RC=0008 which means that other shared system are still active in a shared spooling complex. All other systems are down but the internal count of active systems is corrupted instead.
DY46749
2007/11/07
UD53211-91C
DY46804
2007/11/06
UD53270-91C
DY46732
2007/08/13
UD53179-91C Fixes *PE* UD53235 & UD53175.
DY46782
2007/08/01
UD53235-91C
UD53234-91G

LEVELSET

* DO NOT INSTALL (PE) *
Please install DY46732

1R88I OK message is not returned to the XPCC application as originator of the queue entries manipulation command.
DY46690
2007/07/28
UD53175-91C
UD53176-91G

* DO NOT INSTALL (PE) *
Please install DY46732

DY46672
2007/03/22
UD53131-91C POWER queues are filled and no queue entries are deleted after 1Q59I. A Cold Start may be needed to bypass hang at next IPL.
DY46671
2007/03/21
UD53130-91C PSTOP cuu,FORCE fails to stop printer . LST task waits forever on bad ECB address or VSE/POWER terminates with 1Q2CI SEGMENT TRANSLATION.
DY46700
2007/02/09
UD53099-91C Enable support of autostart statement SET DLSEPSAS.
DY46641
2007/02/08
UD53099-91C
UD53100-91G
Enhance new function 'APPEND' of POFFLOAD command.

 

VSE/POWER 8.1 components

Comp. ID CLC Description
5686-CF8-03 91C VSE/POWER 8.1
5686-CF8-03 91G VSE/POWER 8.1 Macros

 

Unsupported release: VSE/POWER 7.1 APARs for z/VSE V3.1

Last update: April 6, 2009

APAR
Date
PTF Contents
DY47050
2009/04/06
UD53494-81C VSE/POWER doesn't issue 1V24I message (which includes sense data of negative response from remote RJE workstation) on the local console.
DY46952
2008/08/11
UD53392-81C
DY46947
2008/07/09
UD53380-81C
UD53381-81G
DY46911
2008/05/21
UD53355-81C TCP/IP connection is started by VSE/POWER PNET using the CSI TCP/IP stack. CONNECT request is posted complete but following RECEIVE request is posted with ERRNO=1124. Thereafter POWER loops producing a dump and issuing msg 1Q2JI and 1RT2I with ERRNO=113 and CLOSE request.
DY46843
2008/01/09
UD53295-81C
UD53295-81G
When datafile extension is started it may fail with message 1QD3A and RC=0008 which means that other shared system are still active in a shared spooling complex. All other systems are down but the internal count of active systems is corrupted instead.
DY46739
2007/11/13
UD53217-81C After TCP/IP stopped PNET TCP/IP connection no longer established (MSG 1RTYI)
DY46781
2007/08/01
UD53233-81C
UD53232-81G

LEVELSET
1R88I OK message is not returned to the XPCC application as originator of the queue entries manipulation command
DY46730
2007/03/21
FIN Job output (LST) created on z/VSE 3.1.1 and sent to RSCS for LPR printer shows wrong date/time stamp.
DY46713
2007/02/26
UD53171-81C PSTOP cuu,FORCE fails to stop printer . LST task waits forever on bad ECB address or VSE/POWER terminates with 1Q2CI SEGMENT TRANSLATION.
DY46634
2007/02/01
UD53097-81C SET DLSEPSAS=YES in VSE/POWER startup is ignored.
DY46616
2006/12/14
UD53089-81C Continued JECL statements were retrieved via the * $$ SLI statement and one of the continuation card was deleted after having previously caused a syntax error.
DY46609
2006/12/11
UD53087-81C
UD53084-81G

LEVELSET
DY46603
2006/11/30
UD53068-81C PDISPLAY A may fail with 1Q2CI or show garbage for POFFLOAD BACKUP/SAVE/PICKUP.
DY46551
2006/07/26

HIPER
UD53040-81C POFFLOAD SAVE|PICKUP with journaling may overwrite page count, copy count and line count of SAVEd/PICKUPed queue entries.
DY46608
2006/07/21

HIPER
UD53093-81C Fixes *PE* UD53000 & UD53011.

VSE/POWER terminates abnormally during job processing with 1Q2CI in Job exec. task when GOTO handles * SLI
DY46595
2006/07/06
UD53081-81C
DY46519
2006/06/27
UD53028-81C When exactly 128 KST/PUN output segments are created, then the last segment gets a new job number but wrong suffix number 0.
DY46528
2006/01/31
UD53011-81C
UD53010-81G

LEVELSET
* DO NOT INSTALL (PE) *
Please install DY46608.
DY46526
2006/01/30
UD53003-81C When more than 10 CICS systems run in parallel, VSE/POWER is unable to handle 11th request for a NOTIFY connection. The request is accepted but only 10 slots for NOTIFY connections are available. The 11th connection stays in a state which does not received notifications nor can disconnect. Therefore a restart of this CICS will find remains when connected again and DFHRC5301 DBDCCICS FAILED TO INITIALIZE POWER INTERFACE is issued
DY46521
2006/01/12
 
UD53000-81C * DO NOT INSTALL (PE) *
Please install DY46608.
DY46500
2005/11/29
UD52974-81C When the VSE/AF LOCK macro fails for the VSE/POWER external lock IJQFILE, the IDUMP accompanying 1QB5I RC=rr01 does not contain the 31-bit Getvis area with the Lock Manager Table, that should be compared against the 'Lock Manager Error Data' on console to analyze the cause of failure.
DY46472
2005/10/17

HIPER
UD52933-81C At data file extension during warm start msg 1QD2I appears for existing d-file extent but then VSE/POWER branches to lowcore 000000 and is cancelled with msg 1Q2CI PSW ..000002 and with IDUMP of VSE/POWER partition.
DY46462
2005/10/11
UD52927-81C
UD52928-81G

LEVELSET
DY46443
2005/08/30
UD52911-81C During PNET SNA node termination, when all RCV/TSM tasks have terminated, a new RCV task may be created whilst PWR DISCONNECT task is processing, leading to 1QZ0I RC=0031 dump due to later check of task chain, whether any task still exists for terminating NCB.
DY46427
2005/08/15
UD52899-81C
UD52900-81C
DY46423
2005/08/12
UD52894-81C
DY46406
2005/07/12
UD52871-81C
UD52872-81G
When FSU from VSE/ESA 2.7.0 or 2.7.1 or 2.7.2 is started and one VSE/POWER data file extent does not start on Cylinder Boundary (Data file on CKD), the warm start of the VSE/POWER queues fails on z/VSE 3.1 with msg 1Q19I INVALID DATA FILE EXTENT, RC=0003 . VSE/POWER is terminated and FSU can not continue.
DY46390
2005/07/04
UD52867-81C
UD52866-81G
DY46399
2005/06/17
UD52852-81C
DY46395
2005/06/15

HIPER
UD52849-81C After queue file recovery VSE/POWER terminates with Msg1Q2CI:
F1 0001 1QB8I QUEUE FILE RECOVERY COMPLETED
F1 0001 1Q20I AUTOSTART IN PROGRESS
F1 0001 1Q2CI PSW=070D1000003B5CFA ILC=1, CC=21 ILLEGAL SVC
PHASE=IPW$$NU (003B5000,DY46224) TASK=O CP, (0060B200)
DY46381
2005/06/07
UD52841-81C The PCANCEL command specifying a specific job (jobname and optionally jobnumber) for jobs not protected by a password and not issued by a system administrator can cancel any job.
DY46367
2005/05/14
UD52834-81C
UD52835-81G
A DISP=I created job gets the default job execution disposition of 'D'.
Whenever such job fails and cancels, the job is deleted from the reader queue and it can no longer be viewed to verify its correctness.
DY46361
2005/05/13
UD52831-81C When SIGNON record of other PNET node must be rejected by 1RB2I RC=1/5, the invalid other node name is not displayed.
DY46331
2005/03/24
UD52803-81C VSE/POWER may terminate with message 1Q2CI CC=20 in task 'I IT' in module IPW$$NU at offset x'CA0' due to misused TCB.
DY46254
2005/03/23
UD52707-81C
UD52708-81G
DY46246
2005/03/22
UD52695-81C
DY46248
2005/03/21
UD52696-81C
UD52697-81G
DY46323
2005/03/17
UD52784-81C
DY46322
2005/03/03
UD52780-81C
UD52781-81G

 

VSE/POWER 7.1 components

Comp. ID CLC Description
5686-CF7-03 81C VSE/POWER 7.1
5686-CF7-03 81G VSE/POWER 7.1 Macros

 

Unsupported release: VSE/POWER 6.7 APARs for VSE/ESA V2.7

Last update: February 28, 2007

APAR
Date
PTF Contents
DY46657
2007/02/26
UD53115 - 75C PSTOP cuu,FORCE fails to stop printer . LST task waits forever on bad ECB address or VSE/POWER terminates with 1Q2CI SEGMENT TRANSLATION.
DY46615
2006/12/14
UD53088 - 75C Continued JECL statements were retrieved via the * $$ SLI statement and one of the continuation card was deleted after having previously caused a syntax error.
DY46607
2006/12/06
UD53079 - 75C
UD53078 - 75G

LEVELSET
DY46598
2006/11/28
UD53067 - 75C PDISPLAY A may fail with 1Q2CI or show garbage for POFFLOAD BACKUP/SAVE/PICKUP.
DY46552
2006/07/21

HIPER
UD53039 - 75C Fixes *PE* UD52999 & UD53007.

VSE/POWER terminates abnormally during job processing with 1Q2CI in Job exec. task when GOTO handles * SLI
DY46540
2006/06/28
UD53029 - 75C When exactly 128 KST/PUN output segments are created, then the last segment gets a new job number but wrong suffix number 0.
DY46581
2006/06/16
UD53077 - 75C
DY46512
2006/01/30
UD53007 - 75C
UD53006 - 75G

LEVELSET
* DO NOT INSTALL (PE) *
Please install DY46552.
DY46457
2006/01/30
UD52917 - 75C When more than 10 CICS systems run in parallel, VSE/POWER is unable to handle 11th request for a NOTIFY connection. The request is accepted but only 10 slots for NOTIFY connections are available. The 11th connection stays in a state which does not received notifications nor can disconnect. Therefore a restart of this CICS will find remains when connected again and DFHRC5301 DBDCCICS FAILED TO INITIALIZE POWER INTERFACE is issued
DY46520
2006/01/11
 
UD52999 - 75C * DO NOT INSTALL (PE) *
Please install DY46552.
DY46499
2005/11/28
UD52973 - 75C When the VSE/AF LOCK macro fails for the VSE/POWER external lock IJQFILE, the IDUMP accompanying 1QB5I RC=rr01 does not contain the 31-bit Getvis area with the Lock Manager Table, that should be compared against the 'Lock Manager Error Data' on console to analyze the cause of failure.
DY46473
2005/10/18

HIPER
UD52934 - 75C At data file extension during warm start msg 1QD2I appears for existing d-file extent but then VSE/POWER branches to lowcore 000000 and is cancelled with msg 1Q2CI PSW ..000002 and with IDUMP of VSE/POWER partition.
DY46450
2005/10/07
UD52923 - 75C
UD52924 - 75G

LEVELSET
DY46343
2005/08/30
UD52822 - 75C During PNET SNA node termination, when all RCV/TSM tasks have terminated, a new RCV task may be created whilst PWR DISCONNECT task is processing, leading to 1QZ0I RC=0031 dump due to later check of task chain, whether any task still exists for terminating NCB.
DY46418
2005/08/15
UD52895 - 75C
UD52896 - 75C
DY46422
2005/08/11
UD52889 - 75C
DY46375
2005/06/30
UD52859 - 75C
UD52858 - 75G
DY46397
2005/06/17
UD52850 - 75C
DY46394
2005/06/15

HIPER
UD52848 - 75C After queue file recovery VSE/POWER terminates with Msg1Q2CI:
F1 0001 1QB8I QUEUE FILE RECOVERY COMPLETED
F1 0001 1Q20I AUTOSTART IN PROGRESS
F1 0001 1Q2CI PSW=070D1000003B5CFA ILC=1, CC=21 ILLEGAL SVC
PHASE=IPW$$NU (003B5000,DY46224) TASK=O CP, (0060B200)
DY46376
2005/06/02
UD52839 - 75C The PCANCEL command specifying a specific job (jobname and optionally jobnumber) for jobs not protected by a password and not issued by a system administrator can cancel any job.
DY46366
2005/05/10
UD52829 - 75C
UD52830 - 75G
A DISP=I created job gets the default job execution disposition of 'D'.
Whenever such job fails and cancels, the job is deleted from the reader queue and it can no longer be viewed to verify its correctness.
DY46357
2005/04/26
UD52820 - 75C When SIGNON record of other PNET node must be rejected by 1RB2I RC=1/5, the invalid other node name is not displayed.
DY46251
2005/03/23
UD52699 - 75C
UD52700 - 75G

LEVELSET
DY46345
2005/03/21
UD52793 - 75C
UD52794 - 75G
DY46244
2005/03/21
UD52684 - 75C
DY46330
2005/03/02
UD52779 - 75C VSE/POWER may terminate with message 1Q2CI CC=20 in task 'I IT' in module IPW$$NU at offset x'CA0' due to misused TCB.
DY46218
2005/02/25
DOC When FSU from VSE/ESA 2.7 to z/VSE 3.1 fails, VSE/POWER restarting on VSE/ESA 2.7 rejects already migrated queue & data file with message 1Q04I with RC=0001
DY46205
2005/01/15
UD52654
UD52653
DY46308
2004/12/30
UD52756
 
DY46302
2004/12/16
UD52751
UD52752

LEVELSET
DY46287
2004/11/02
UD52719
UD52720
 
DY46278
2004/10/14
UD52711
DY46171
2004/09/21
UD52627 When RJE,SNA is terminated by PSTOP RJE,SNA,EOJ it may take a long time until all data is transmitted. In between a PSTART RJE,SNA command is rejected by message 1R65I RJE,SNA ALREADY STARTED but no RJE terminal is able to SIGNON.
DY46264
2004/09/08
UD52689
UD52690

LEVELSET
 
DY46258
2004/08/20
UD52676 Deleting many (1000) VSE/POWER queue entries at one time may end up in monopolizing the spooling process and the shared t1-exchange by the VSE/POWER private termination subtask, which drives the 2nd stage of queue entry deletion.
DY46164
2004/08/11
UD52573 Due to either slow mechanical performance or unfavorable microcode, some tape units (3490F) may cause the VSE/POWER POFFLOAD LOAD or SELECT function to require much more time (hours instead of minutes).
DY46242
2004/06/24
UD52655
UD52656

LEVELSET
DY46123
2004/04/26

 
UD52521
UD52528

 
DY46130
2004/04/21

HIPER
UD52520

 
DY46109
2004/02/18

HIPER
UD52510
UD52511

LEVELSET
DY46190
2004/02/10
UD52579
 
When a non shared VSE/POWER startup phase addresses a shared VSE/POWER queue/data file for warm start commented by msg 1QB3I then msg 1QB3D asks, if another CPU still operates on the spool files. At incorrect reply the sharing and the non shared system operate acc. to different rules and destroy the free DBLKGP subchains. This leads to many drastic errors, e.g. 1QZ0I RC=14 or 1QFAA & 1QH3I.
DY46173
2003/12/30
UD52561
UD52562
DY46153
2003/10/28
UD52526
UD52527
DY46067
2003/10/13

HIPER
UD52453
UD52448

LEVELSET
DY46063
2003/09/15

 
UD52414

 
DY46056
2003/08/25
UD52390
UD52391
DY46128
2003/08/07
UD52476
DY46107
2003/07/10
UD52458
UD52457

LEVELSET
DY46031
2003/06/27

HIPER
UD52377
UD52378
DY46110
2003/06/26
UD52440 When the queue file is placed beyond track 32768, VSE/POWER issues message 1QE8A erroneously. Also queue file re-allocation is no longer possible, when the queue file is placed beyond track 32768. It will fail with message 1QE2A RC=0005
DY46024
2003/06/16
UD52370 When the account file is full, a PACCOUNT DEL/DISK/TAPE must be started, to free the account file. When PACCOUNT task starts, the TCB is located in PFIXed storage cushion. If no PFIXed storage is available, any further request for PFIXed storage issued by the PACCOUNT task fails and the task waits forever, because other tasks can't release storage until they can write their accounting records.
DY46094
2003/05/19
UD52425
DY46088
2003/05/15
UD52419
DY46073
2003/04/29
UD52405 When a continued * $$ LST statement in an SLI member is updated, following error message appears:
1R33D CORRECT FULL STATEMENT
If for example the following SLI-member SLIMEMB.M01 is used with the sequence numbers in column 73-80:
* $$ LST DISP=H, ... M0100001
* $$ CLASS=A, ... M0100002
* $$ DEST=(,HUS), ... M0100003
* $$ FNO=HUHU, ... M0100004
* $$ PRI=4 ... M0100005
and the job stream contains following statement:
* $$ SLI=SLIMEMB.01
* $$ LST DISP=L, ... -$SLIR001
* $$ CLASS=U, ... -$SLIR002
* $$ PRI=8 ... $SLIR005
the following error messages are issued
* $H CLASS=A, ..... M0100002
1Q49I INVALID DELIMITER , COL=00072..
1R33D CORRECT FULL STATEMENT BG
If SLIMEMB.M01 contains a non-blank character in continuation column 72
DY45981
2003/04/10

HIPER
UD52347 When PSTOP cuu,FORCE is issued, the termination of the printer task will overlay the previously used save area. This may cause VSE/POWER abnormal termination indicated by message 1Q2CI.
DY46030
2003/02/04
UD52345
UD52346

LEVELSET
DY46047
2003/02/25
UD52343
UD52344
DY46046
2003/02/24
UD52341
UD52342
VSE/POWER uses as local ip-address always the one specified in the TCP/IP statement SET IPADDR and passes it via NJE control records to the remote node which issues message 1RT5I if the ip-address does not match its definition. So PNET/TCP is unable to work behind a firewall.
DY46045
2003/02/20
UD52340
DY46044
2003/02/19
UD52339 &PWRTNOD will appear as blank, although the executing node has a non blank node name. Using * $$ LST DEST=* however will create &PWRTNOD with node name of executing system.

 

VSE/POWER 6.7 components

Comp. ID CLC Description
5686-066-03 75C VSE/POWER 6.7
5686-066-03 75G VSE/POWER 6.7 Macros

 

Unsupported release: VSE/POWER 6.6 APARs for VSE/ESA V2.6

Last update: July 25, 2006

APAR
Date
PTF Contents
DY46527
2006/01/31
UD53009 - 65C
UD53008 - 65G

LEVELSET
* DO NOT INSTALL (PE) *
Please use this Patch (PDF, 5KB) if you have already installed this PTF or if you must install this PTF to correct other problems.
DY46456
2006/01/30
UD52919 - 65C When more than 10 CICS systems run in parallel, VSE/POWER is unable to handle 11th request for a NOTIFY connection. The request is accepted but only 10 slots for NOTIFY connections are available. The 11th connection stays in a state which does not received notifications nor can disconnect. Therefore a restart of this CICS will find remains when connected again and DFHRC5301 DBDCCICS FAILED TO INITIALIZE POWER INTERFACE is issued
DY46438
2006/01/11
UD52915 - 65C * DO NOT INSTALL (PE) *
Please use this Patch (PDF, 5KB) if you have already installed this PTF or if you must install this PTF to correct other problems.

DY46497
2005/11/28
UD52971 - 65C When the VSE/AF LOCK macro fails for the VSE/POWER external lock IJQFILE, the IDUMP accompanying 1QB5I RC=rr01 does not contain the 31-bit Getvis area with the Lock Manager Table, that should be compared against the 'Lock Manager Error Data' on console to analyze the cause of failure.
DY46474
2005/10/20

HIPER
UD52942 - 65C At data file extension during warm start msg 1QD2I appears for existing d-file extent but then VSE/POWER branches to lowcore 000000 and is cancelled with msg 1Q2CI PSW ..000002 and with IDUMP of VSE/POWER partition.
DY46461
2005/10/07
UD52925 - 65C
UD52926 - 65G

LEVELSET
DY46442
2005/08/30
UD52910 - 65C During PNET SNA node termination, when all RCV/TSM tasks have terminated, a new RCV task may be created whilst PWR DISCONNECT task is processing, leading to 1QZ0I RC=0031 dump due to later check of task chain, whether any task still exists for terminating NCB.
DY46426
2005/08/15
UD52897 - 65C
UD52898 - 65C
DY46419
2005/08/09
UD52885 - 65C
DY46389
2005/06/28
UD52855 - 65C
UD52854 - 65G
DY46398
2005/06/17
UD52851 - 65C
DY46318
2005/06/15

HIPER
UD52766 - 65C After queue file recovery VSE/POWER terminates with Msg1Q2CI:
F1 0001 1QB8I QUEUE FILE RECOVERY COMPLETED
F1 0001 1Q20I AUTOSTART IN PROGRESS
F1 0001 1Q2CI PSW=070D1000003B5CFA ILC=1, CC=21 ILLEGAL SVC
PHASE=IPW$$NU (003B5000,DY46224)
TASK=O CP, (0060B200)
DY46380
2005/06/07
UD52840 - 65C The PCANCEL command specifying a specific job (jobname and optionally jobnumber) for jobs not protected by a password and not issued by a system administrator can cancel any job.
DY46365
2005/05/09
UD52827 - 65C
UD52828 - 65C
A DISP=I created job gets the default job execution disposition of 'D'.
Whenever such job fails and cancels, the job is deleted from the reader queue and it can no longer be viewed to verify its correctness.
DY46356
2005/04/22
UD52816 - 65C When SIGNON record of other PNET node must be rejected by 1RB2I RC=1/5, the invalid other node name is not displayed.
DY46227
2005/03/21
UD52685 - 65C
UD52686 - 65G

LEVELSET
DY46226
2005/03/21
UD52680 - 65C
UD52683 - 65G
DY46232
2005/03/17
UD52679 - 65C
DY46224
2005/03/02
UD52678 - 65C VSE/POWER may terminate with message 1Q2CI CC=20 in task 'I IT' in module IPW$$NU at offset x'CA0' due to misused TCB.
DY46309
2005/01/17
UD52763
UD52762
DY46306
2004/12/29
UD52755
DY46300
2004/12/14
UD52749
UD52750

LEVELSET
DY46285
2004/10/29
UD52717
UD52718
 
DY46280
2004/10/15
UD52712
DY46168
2004/09/21
UD52626 When RJE,SNA is terminated by PSTOP RJE,SNA,EOJ it may take a long time until all data is transmitted. In between a PSTART RJE,SNA command is rejected by message 1R65I RJE,SNA ALREADY STARTED but no RJE terminal is able to SIGNON.
DY46152
2004/09/01
UD52618
UD52619

LEVELSET
DY46256
2004/08/19
UD52675
 
Deleting many (1000) VSE/POWER queue entries at one time may end up in monopolizing the spooling process and the shared t1-exchange by the VSE/POWER private termination subtask, which drives the 2nd stage of queue entry deletion.
DY46245
2004/08/06
UD52667 Due to either slow mechanical performance or unfavorable microcode, some tape units (3490F) may cause the VSE/POWER POFFLOAD LOAD or SELECT function to require much more time (hours instead of minutes).
DY46150
2004/06/22
UD52557
UD52558

LEVELSET
DY46222
2004/05/03

 
UD52620
UD52621

 
DY46129
2004/04/20

HIPER
UD52519

 
DY46108
2004/02/17

HIPER
UD52502
UD52503

LEVELSET
DY46175
2004/02/09
UD52577
 
When a non shared VSE/POWER startup phase addresses a shared VSE/POWER queue/data file for warm start commented by msg 1QB3I then msg 1QB3D asks, if another CPU still operates on the spool files. At incorrect reply the sharing and the non shared system operate acc. to different rules and destroy the free DBLKGP subchains. This leads to many drastic errors, e.g. 1QZ0I RC=14 or 1QFAA & 1QH3I.
DY46169
2003/12/24
UD52559
UD52560
DY46149
2003/10/23
UD52524
UD52525
DY46066
2003/10/10

HIPER
UD52434
UD52447

LEVELSET
DY46063
2003/09/11

 
UD52413

 
DY46049
2003/08/22
UD52388
UD52389
DY46050
2003/08/07
UD52387
DY46117
2003/07/22
UD52464
UD52465
DY46114
2003/07/07

HIPER
UD52449
UD52450

LEVELSET
DY46033
2003/06/25
UD52376
DY46092
2003/05/16
UD52420
DY45987
2003/05/07
UD52354
DY46072
2003/04/29
UD52404 When a continued * $$ LST statement in an SLI member is updated, following error message appears:
1R33D CORRECT FULL STATEMENT
If for example the following SLI-member SLIMEMB.M01 is used with the sequence numbers in column 73-80:
* $$ LST DISP=H, ... M0100001
* $$ CLASS=A, ... M0100002
* $$ DEST=(,HUS), ... M0100003
* $$ FNO=HUHU, ... M0100004
* $$ PRI=4 ... M0100005
and the job stream contains following statement:
* $$ SLI=SLIMEMB.01
* $$ LST DISP=L, ... -$SLIR001
* $$ CLASS=U, ... -$SLIR002
* $$ PRI=8 ... -$SLIR005
the following error messages are issued
* $H CLASS=A, ..... M0100002
1Q49I INVALID DELIMITER , COL=00072..
1R33D CORRECT FULL STATEMENT BG
If SLIMEMB.M01 contains a non-blank character in continuation column 72
DY45973
2003/04/10

HIPER
UD52338 When PSTOP cuu,FORCE is issued, the termination of the printer task will overlay the previously used save area. This may cause VSE/POWER abnormal termination indicated by message 1Q2CI.
DY46038
2003/02/05
UD52327
DY46020
2002/12/20
UD52315
UD52314

LEVELSET
DY46015
2002/12/16
UD52303
UD52304
VSE/POWER uses as local ip-address always the one specified in the TCP/IP statement SET IPADDR and passes it via NJE control records to the remote node which issues message 1RT5I if the ip-address does not match its definition. So PNET/TCP is unable to work behind a firewall.
DY45900
2002/12/13
UD52193 When a VSE/POWER subtask fails while it executes a $$B-transient in Logical Transient Area (LTA), the VSE/POWER message 1Q2CI does not point to the failing instruction but to the SVC 2 instead.
DY46012
2002/12/10
UD52292 &PWRTNOD will appear as blank, although the executing node has a non blank node name. Using * $$ LST DEST=* however will create &PWRTNOD with node name of executing system.
DY45999
2002/11/14
UD52282
UD52283
DY45895
2002/11/13

HIPER
UD52186 VSE operator starts VSE/POWER task reading jobs from SYSIN tape by command PSTART RDR,tapeaddr. When task completes, shortly afterwards other tasks may fail with various symptoms due to corrupted work areas. MSG1QZ0I RC=45 may be issued by print task or PDISPLAY LST may show page count of 6656 pages left for printing for an active output.
DY45870
2002/08/15

 
UD52171
UD52170

LEVELSET
DY45853
2002/07/23

 
UD52155
DY45942
2002/06/27

HIPER
UD52213 After extending the command area to 130 byte, PXMIT does no longer pass commands in correct form to Device Driving Systems like PSF or CICS/RCF. he command is rejected for example by MSG1QY6I PXMIT COMMAND NOT ACCEPTED BY DDS=SYSPSFP1, RC=0801 .
DY45933
2002/06/14
UD52198 When POFFLOAD PICKUP runs while entries of the Wait for run sub queue expire or are re-scheduled, then entries may get lost from the WFR sub queue.
DY45835
2002/04/29

HIPER
UD52113
UD52112

LEVELSET
DY45825
2002/03/14
UD52050 When a SAS BROWSE tasks accesses a job currently being executed by a partition the QRS2.QR2XRD flag is reset and therefore the PDISPLAY RDR display does no longer contain the active partition information (PART=partition-id).
DY45821
2002/02/22

HIPER
UD52041 The DELETION-Queue entry is not freed when the last accessing SAS BROWSE task is terminated abnormally. This may cause Short on DBLK conditions indicated by message 1Q38A NO DASD SPACE AVAILABLE
DY45806
2002/02/08
UD52031
UD52032
DY45884
2002/02/06
UD52100
UD52099

LEVELSET
DY45804
2002/01/31
UD52025
UD52026
If a VSE/POWER command longer than 71 characters is issued, POWER truncates the command and sets the last byte to blank for its command parsing. These maimed commands lead to various error message like 1R52I command-code LAST OPERAND INVALID or 1R52I command-code OPERAND nn INVALID or the truncated command may be accepted but return a wrong result.
DY45874
2002/01/24
UD52077
UD52078
List output has been produced using an FCB specified in the * $$ LST statement. When list output is printed on the local printer the separator pages contain the FCBNAME. Whenlist output is retrieved via the spool access support (SAS), the FCBNAME is missing on the separator pages.
DY45786
2001/12/21
UD520005 If MACC count of a queue entry is not correctly decremented by SAS or DST Browse task, the entry might added to the DELETION queue although no task is actually browsing the entry. Then the DBLK groups of this entry are kept and storage is not released.
DY45783
2001/12/04
UD51969 After the introduction of the APAR DY45276 to detect if the POFFLOAD command was being issued for a labeled tape without the labeled tape operands the message 1Q77I RC=000A was introduced but without respecting the necessary register usage.
DY45838
2001/11/22
UD52015
UD52016
The LEFT= count presented at D A for a PNET transmitter is built with a 3 byte field TNETL copied by IPW$$NT at startup time from the corresp. 4 byte card/lines counts in the q-record. At D A the already transmitted number (4 bytes) is subtracted from TNETL and is shown as 'LEFT='. This fails and becomes negative for q-entries with total counts greater than 16MB (needs more than 3 bytes).
DY45750
2001/11/21
UD51949
DY45749
2001/11/16
UD51936
UD51939

LEVELSET
According to PLOAD 'Loading an Exit Routine (Format 2)' in VSE/POWER Admin. and Oper. the new exit gains control with the next record passed to the exit, but its increased workarea (as presented alreadyby PDISPLAY EXIT) size takes only effect
When these logical boundaries are not respected by operators at PLOAD time, and the exit itself does not verify, whether the expected work area size has become effective, failures may occur.
DY45748
2001/11/16
UD51936 VSE/POWER networking function may fail with various symptoms, when records with a record length of approximately 1020 bytes are received. For PNET BSC/CTC/TCP IDUMP will be taken (1Q2JI) from IPW$$NK followed by message 1RB6I with RC=00C1. For PNET SNA unpredictable results may occur.
DY45747
2001/11/16
UD51936
UD51939
VSE/POWER LIST & PUNCH account records miss information about programmer name, building, department, room and VM distribution code. This information is shown on separator pages/cards but not included in the LST/PUN account records.
DY45745
2001/11/16
UD51936
UD51939
Program spools to 3800 printer using a default FCB 885G set by SETDF. Whenever a PDUMP request is issued, dump routine IJBXDPIO issues one SETPRT request to reset the printer before the dump is printed and another SETPRT request to reestablish the original values. This causes VSE/POWER to segment the output in multiple parts. For example TCP/IP FOR VSE issues more than 20 PDUMP requests, resulting in more than 20 outputs. Output spooled to non-3800 printer or to 3800 printer without FCB is not segmented. The segmented dump hinders dump analysis.

 

VSE/POWER 6.6 components

Comp. ID CLC Description
5686-066-03 65C VSE/POWER 6.6
5686-066-03 65G VSE/POWER 6.6 Macros

 

Unsupported release: VSE/POWER 6.5 APARs for VSE/ESA V2.5

Last update: February 25,2005

APAR
Date
PTF Contents
DY46065
2003/10/08

HIPER
UD52431
UD52430
DY46054
2003/08/25
UD52392 When a totally filled POWER Account file resides on CKD and is saved to a equally sized CKD SD file by PACCOUNT DISK,dlblname the saving task may fail with message
0P22I P TRACK FMT SYSxxx=cuu
The Account file can not be saved thus the system is locked until it is saved to tape or deleted.
DY46127
2003/08/07
UD52475
DY46118
2003/07/23
UD52466
UD52467

LEVELSET
DY46032
2003/06/25
UD52375 When the account file is full, a PACCOUNT DEL/DISK/TAPE must be started, to free the account file. When PACCOUNT task starts, the TCB is located in PFIXed storage cushion. If no PFIXed storage is available, any further request for PFIXed storage issued by the PACCOUNT task fails and the task waits forever, because other tasks can't release storage until they can write their accounting records.
DY46093
2003/05/19
UD52424
DY46087
2003/05/15
UD52418
DY45960
2003/04/08

/ HIPER
UD52318 When PSTOP cuu,FORCE is issued, the termination of the printer task will overlay the previously used save area. This may cause VSE/POWER abnormal termination indicated by message 1Q2CI.
DY45948
2003/04/08
UD52319 When a continued * $$ LST statement in an SLI member is updated, following error message appears:
1R33D CORRECT FULL STATEMENT
If for example the following SLI-member SLIMEMB.M01 is used with the sequence numbers in column 73-80:
* $$ LST DISP=H, M0100001
* $$ CLASS=A, M0100002
* $$ DEST=(,HUS), M0100003
* $$ FNO=HUHU, M0100004
* $$ PRI=4 M0100005
and the job stream contains following statement:
* $$ SLI=SLIMEMB.01
* $$ LST DISP=L, -$SLIR001
* $$ CLASS=U, -$SLIR002
* $$ PRI=8 $SLIR005
the following error messages are issued
* $H CLASS=A, ..... M0100002
1Q49I INVALID DELIMITER , COL=00072..
1R33D CORRECT FULL STATEMENT BG
If SLIMEMB.M01 contains a non-blank character in continuation column 72
DY46030
2003/02/04
UD52326
DY45901
2002/12/18
UD52199
UD52194

LEVELSET
VSE/POWER uses as local ip-address always the one specified in the TCP/IP statement SET IPADDR and passes it via NJE control records to the remote node which issues message 1RT5I if the ip-address does not match its definition. So PNET/TCP is unable to work behind a firewall.
DY46007
2002/12/16
UD52307
UD52308
Job output was being submitted via the SAS PUT interface, and when the internally provided job and data set control records were opened and initialized by the IPW$$PC function, corrupted data provided by the caller caused a loop.
DY46019
2002/12/16
UD52305 When a VSE/POWER subtask fails while it executes a $$B-transient in Logical Transient Area (LTA), the VSE/POWER message 1Q2CI does not point to the failing instruction but to the SVC 2 instead.
DY46016
2002/12/11
UD52294 &PWRTNOD will appear as blank, although the executing node has a non blank node name. Using * $$ LST DEST=* however will create &PWRTNOD with node name of executing system.
DY45898
2002/11/18

HIPER
UD52187 VSE operator starts VSE/POWER task reading jobs from SYSIN tape by command PSTART RDR,tapeaddr. When task completes, shortly afterwards other tasks may fail with various symptoms due to corrupted work areas. MSG1QZ0I RC=45 may be issued by print task or PDISPLAY LST may show page count of 6656 pages left for printing for an active output.
DY45891
2002/11/12
UD52177
UD52185
DY45961
2002/08/19
UD52233
UD52232

LEVELSET
DY45863
2002/07/31
UD52169
DY45855
2002/06/27

HIPER
UD52147 After extending the command area to 130 byte, PXMIT does no longer pass commands in correct form to Device Driving Systems like PSF or CICS/RCF. he command is rejected for example by MSG1QY6I PXMIT COMMAND NOT ACCEPTED BY DDS=SYSPSFP1, RC=0801 .
DY45931
2002/06/13
UD52196 When POFFLOAD PICKUP runs while entries of the Wait for run sub queue expire or are re-scheduled, then entries may get lost from the WFR sub queue.
DY45834
2002/04/29

HIPER
UD52111
UD52106

LEVELSET
DY45823
2002/03/11
UD52047 When a SAS BROWSE tasks accesses a job currently being executed by a partition the QRS2.QR2XRD flag is reset and therefore the PDISPLAY RDR display does no longer contain the active partition information (PART=partition-id).
DY45816
2002/02/20

HIPER
UD52040
DY45875
2002/02/06
UD52096
UD52095

LEVELSET
DY45803
2002/01/31
UD52023
UD52024
If a VSE/POWER command longer than 71 characters is issued, POWER truncates the command and sets the last byte to blank for its command parsing. These maimed commands lead to various error message like 1R52I command-code LAST OPERAND INVALID or 1R52I command-code OPERAND nn INVALID or the truncated command may be accepted but return a wrong result.
DY45797
2002/01/14
UD52006
UD52007
List output has been produced using an FCB specified in the * $$ LST statement. When list output is printed on the local printer the separator pages contain the FCBNAME. Whenlist output is retrieved via the spool access support (SAS), the FCBNAME is missing on the separator pages.
DY45784
2001/12/11
UD51977 If MACC count of a queue entry is not correctly decremented by SAS or DST Browse task, the entry might added to the DELETION queue although no task is actually browsing the entry. Then the DBLK groups of this entry are kept and storage is not released.
DY45765
2001/11/30
UD51960 After the introduction of the APAR DY45276 to detect if the POFFLOAD command was being issued for a labeled tape without the labeled tape operands the message 1Q77I RC=000A was introduced but without respecting the necessary register usage.
DY45828
2001/11/21
UD52013
UD52014
The LEFT= count presented at D A for a PNET transmitter is built with a 3 byte field TNETL copied by IPW$$NT at startup time from the corresp. 4 byte card/lines counts in the q-record. At D A the already transmitted number (4 bytes) is subtracted from TNETL and is shown as 'LEFT='. This fails and becomes negative for q-entries with total counts greater than 16MB (needs more than 3 bytes).
DY45820
2001/11/09
UD51997
DY45811
2001/10/15
UD51967
UD51966

LEVELSET
According to PLOAD 'Loading an Exit Routine (Format 2)' in VSE/POWER Admin. and Oper. the new exit gains control with the next record passed to the exit, but its increased workarea (as presented alreadyby PDISPLAY EXIT) size takes only effect.
When these logical boundaries are not respected by operators at PLOAD time, and the exit itself does not verify, whether the expected work area size has become effective, failures may occur.
DY45800
2001/09/26
UD51959 VSE/POWER networking function may fail with various symptoms, when records with a record length of approximately 1020 bytes are received. For PNET BSC/CTC/TCP IDUMP will be taken (1Q2JI) from IPW$$NK followed by message 1RB6I with RC=00C1. For PNET SNA unpredictable results may occur.
DY45732
2001/09/26
UD51880
UD51881
VSE/POWER LIST & PUNCH account records miss information about programmer name, building, department, room and VM distribution code. This information is shown on separator pages/cards but not included in the LST/PUN account records.
DY45721
2001/09/24
UD51861
UD51870
Program spools to 3800 printer using a default FCB 885G set by SETDF. Whenever a PDUMP request is issued, dump routine IJBXDPIO issues one SETPRT request to reset the printer before the dump is printed and another SETPRT request to reestablish the original values. This causes VSE/POWER to segment the output in multiple parts. For example TCP/IP FOR VSE issues more than 20 PDUMP requests, resulting in more than 20 outputs. Output spooled to non-3800 printer or to 3800 printer without FCB is not segmented. The segmented dump hinders dump analysis.
DY45714
2001/09/18
UD51859 MSG1Q55D holds MMB untill an operator replies to it. This can cause subsequent power subtask needing MMB to wait. If a PDISPLAY command is issued, it will lock the DMB and then wait for the MMB to display the queue file. In case of shared spooling the DMB lock locks also the queue file and all other shared spooling systems will stall, indicated by message 1QB6I QUEUE FILE LOCKED BY ANOTHER SYSTEM.
DY45780
2001/08/31
UD51921 CICS/TS Report Controller sends new messages DFHRC5478/9 to VSE/POWER instead of old messages DFH5478/9 as CICS/VSE still does. The new messages are not prefixed by POWER message 1QZ2A but with 'FROM devicename:' and therefore not highlighted.
DY45769
2001/08/10
UD51907
UD51908

LEVELSET
Message 1Q2BI NOTHING TO 'OFFLOAD' has no unique return code for failure, but offers 6 possibilities by explanation.
DY45679
2001/08/02
UD51828
DY45763
2001/07/30

HIPER
UD51897 With support of NORUN=IGN (by DY45592) when used for job running in dynamic class (with max-active-per-class = 1) and more than one dispatchable job queued - when 1st job completes, the second is set to DISP=*. It is never executed but remains in the RDR-queue forever. No command can access it.
DY45675
2001/07/19
UD51815 CICS Report Controller may pass invalid Optional Parameter Text Blocks (OPTB) via OUTDESCR parm field of EXEC CICS SPOOLOPEN OUTPUT. If 'PAGEDEF=(' with no value and no closing quote is passed due to program error, parameter check routine in IPW$$OP loops.
DY45647
2001/07/09
UD51810 When pfixed storage in VSE/POWER is destroyed, the cause is difficult to find, therefore the FULL task trace should be enabled to verify the chain of PFIXED storage elements. This chain is also called BCW (buffer control word) chain or real storage chain.
DY45613
2001/05/23
UD51791 CICS Report Controller may pass invalid Optional Parameter Text Blocks (OPTB) via OUTDESCR parm field of EXEC CICS SPOOLOPEN OUTPUT If 'PAGEDEF=(' with no value and no closing parenthesis is passed due to program error, parameter check routine in IPW$$OP loops.
DY45607
2001/05/17
UD51789 PDISPLAY queue,TAPE=cuu locks the DMB through creating a $TAPnnnn entry and prevents other tasks from spooling during tape reading.
DY45701
2001/04/27
UD51821
UD51822
DY45591
2001/04/04
UD51759 When a VSE/POWER JOBEXIT is active and terminates a VSE job (return x'0C' in RF) when handling a // JOB statement the logical reader function loops and presents the same card again and again to the JOBEXIT.
DY45584
2001/03/19
UD51698
UD51701
Internal return codes from TCP/IP calls are classified into different groups linked to the appropriate error handling (Ignore/Restart/Terminate Connection). Instead of terminating a connection VSE/POWER should try to restart the connection.
DY45570
2001/03/05
UD51676 The task trace with option FULL forces a program check to swap the AF DEBUG areas, but due to VSE/POWER STXIT AB swapping is not handled by AF and the AF DEBUG area will be overlayed by AF DEBUG entries created by the dump function.
DY45562
2001/02/09

HIPER
UD51628
UD51627

LEVELSET
DY45634
2001/01/09

HIPER
UD51699 VSE/POWER storage is destroyed and causes various abends like 1Q2CI CC=25 or CC=20 for various tasks. Storage is destroyed x'1C4' after eye-catcher "CIB 55C" by value of start address of IPW$$MX + x'2660'. Destruction happens at EOJ of spooled job when notification message 1Q5DI is prepared for CICS, DSNX or ICCF.
DY45555
2001/01/09
UD51623
DY45554
2000/12/18
UD51618
UD51619
DY45546
2000/12/13
UD51602 For improved reliability of TCP/IP connections, it is recommended to install PTF UQ49529 for TCP/IP for VSE.
DY45622
2000/12/12

HIPER
UD51672 VSE/POWER terminates with message 1Q2CI CC=20 SEGMENT TRANSLATION in module IPW$$PS at offset x'38E0'.
DY45543
2000/11/20
UD51594
UD51597
DY45464
2000/10/26
UD51584
UD51585
VSE/POWER does not allow to transmit more than 256 bytes of data per VTAM call for RJE,SNA work stations, although modern RJE,SNA emulations support a buffersize of up to 4096 Byte.
DY45514
2000/10/12

HIPER
UD51559
UD51560
Multiple problems in PNET TCP
detected since shipment
DY45521
2000/10/02
UD51555
UD51556

LEVELSET
DY45511
2000/09/19
UD51532
UD51533
DY45498
2000/08/22
UD51520 When spooling output to tape and the job does not specify the tape unit address in the *$$LST/PUN card with the TADDR= operand, then the operator is prompted with the msg1Q55D SPECIFY TAPE ADDRESS. When the operator responds without specifing the tape address (simply hits the ENTER key), then the msg1Q5KI TAPE SPOOLING FORCED TO DISK occurs and the job hangs and operator has to flush the job to continue.
DY45489
2000/08/22
UD51516
UD51517

 

VSE/POWER 6.5 components

Comp. ID CLC Description
5686-066-03 55C VSE/POWER 6.5
5686-066-03 55G VSE/POWER 6.5 Macros

 

IBM Mainframe: Make the Extraordinary Possible

  • The mainframe is essential in today's digital world, enabling 90% of Fortune 500 companies.

IBM zEnterprise System

  • zEnterprise

    The IBM zEnterprise System extends modern mainframe capabilities for enterprises of all sizes to help cut costs, improve service, and fuel innovation for business growth.

Rate zEnterprise product