Unsupported release: VSE/Interactive Interface and VSE/ICCF 8.2 APARs for z/VSE V4.2

Last update: November 3, 2011

APAR
Date
PTF Contents
PM50997
2011/11/02
UK73224-01C DTRIATTN HANGS IN CERTAIN CASES
If in certain cases like heavy loaded system running DTRIATTN in a low priority partition, the SVC 30 gets a busy condition, the subsequent wait may wait forever due to the fact the ECB is already posted.
PM40434
2011/07/11
UK69457-01C IND$FILE TRANSFER WITH DBCS TERMINAL DOES NOT ALLOW OPTIONS LRECL=80 BINARY TRANSFERRING TO A VSE LIBRARY
SEND PTFFILE.BIN A:PTFFILE Z (FILE=LIB L=PRD1 S=BASED LRECL=80 BINARY gets message INW0006I BINARY is INVALID or CONFLICTING OPTION if send command is issued by a DBCS terminal. This works on a single byte mode terminal. DBCS uses APVUfile instead of IND$FILE
PM33126
2011/02/14
UK65063-01C MESSAGE INDICATOR BLINKING AND NOT RESET AFTER REDISPLAY
If only a few lines left on the screen, entering a command like MAP followed by PF7 and then PF3 end in the fact that the MESSAGE indicator is blinking and cannot be reset. Only ending the console (PF3) resets the console correctly.
PM32578
2011/02/14
UK64714-01C UPPERCASE TRANSLATION FOR SPECIAL CHARACTERS 'BA'X AND 'BB'X NOT DISPLAYABLE.
Special characters 'BA'x and 'BB'x cannot be displayed on Japanese terminal. Uppercase translation should reflect this to characters and translate to '4D'x resp. '5D'x.
PM31473
2011/01/31
UK64451-01C HANG ON SYSTEM CONSOLE FOLLOWED BY INTERVENTION REQUIRED.
System console got suspended ending up in a hang. Console was an OSA-ICC console. The hang is pointing to IJBCNSTD using MVS simulated TTIMER instead of the DOS TTIMER.
PM30460
2011/01/20
UK63952-01C UPPERCASE TRANSLATION OT OME MESSAGES WITH DBCS MESSAGES NOT WORKING CORRECTLY
If default is changed to uppercase in IJBJDEF or IESJDEF, message explanation (PF9) shows garbage.
PM30311
2011/01/20
UK63859-01C IESWAITR FAILS IF SEVERAL OUTSTANDING REPLIES ARE THERE FOR 10 OTHER PARTITIONS
IESWAITR fails if there are several outstanding replies for other partitions, such that the target replid has folded onto the nextline of the console response like
AR 0015 1I87I REPLY TO: F6-0006 F8-0008 FA-0010 F9-0009 F7-0007
F3-0003 FB-0118
Reply for FB is not recognized, IESWAITR reissues MSG FB until allowed maximum time is exceeded.
PM23764
2010/10/04
UK60989-01C ADJUST COMPILE SKELETONS FOR RPG II ON CICS TS
After PM23298, compile dialogs will use new JCL for RPG II. New parameter for RPGIAUTO program and new stub required for running RPG II compile job with new support.
PM22283
2010/10/04
UK60725-01C MESSAGE EXPLANATION FOR JAPANESE TRANSLATED TO UPPERCASE
Message explanation (PF9) is translated to uppercase if the default in IESJDEF is changed to UPPERCASE. The Kanji DBCS characters should not be translated.
PM23298
2010/09/30
UK60877-01C IUI SUPPORT FOR RUNNING RPG ON CICS TS
With RPG APARs PM16528 and PM22788, RPG II can be used on CICS TS. With this APAR skeletons RPGINST and RPGSAMPL are established to allow to run RPG without having CICS/VSE installed.
PM13810
2010/05/26
UK57234-01C REMOVE OF GENERATION PART NOT DONE IF IF SWITCH BACK TO PRODUCTION USER IS SELECTED IN FSU
Step DTRFSU16 ends with
// EXEC MSHP
1S54I PHASE MSHP IS TO BE FETCHED FROM IJSYSRS.SYSLIB
1S55I LAST RETURN CODE WAS 0016
This is because the MSHP step has no control statements generated. This is in case the generation part should be removed.
PM05296
2010/02/02
UK53789-01C GENERATION FEATURE COMPONENT RECORD NOT DELETED FROM HISTORY FILE DURING FSU VERSION UPGRADE
When running a FSU Release/Version upgrade and the Generation Feature is installed, then the PRODUCT-ID is deleted from the history file but not the Component-ID, which should be deleted as well. Without deletion of the Component-ID old PTF or APAR records will be kept in the History file and this may confuse users.
PM06381
2010/02/01
UK53974-01C PROGRAM CHECK PROTECTION EXCEPTION IN IESVRCAT IF CATALOG HAS MORE THAN 123 VOLUMES.
If a catalog has more than 123 volumes, fastpath 22 abends with
K402I CSECT ENTERED = IESAVRCAT
K403I ICCF RETURN CODE = 08
This is due to a program check protection exception.
PM05770
2010/01/28
UK53903-01D
UK53905-01E
ENHANCEMENTS NLS
PM05277
2010/01/28
UK53901-01C ENHANCEMENTS NLS
PK93687
2009/08/12
UK49079-01C FSU STAGE 2, JOB DTRFSUCL FAILS IN CASE AN ESM IS USED.
Job DTRFSUCL get a return code 16 in case an ESM is used instead of BSM. Conditional JCL should handle this.
PK92846
2009/08/12
UK49061-01C ABEND ATNI AND IN CASE THE TCTE INDICATES A SESSION ERROR, OLPD SHOULD NOT BE DRIVEN
After an abend ATNI as well as in case TCTEASE and TCTEUFRI are set, OLPD user screen should not be displayed since the terminal is not available. After a session error OLPD ended in an additional ATCV abend. This abend should be avoided.
PK87299
2009/06/19
UK47529-01C PRINT FUNCTION ON PANEL IESADMBSLG DOES NOT WORK ID PROGRAM AUTO INSTALL IS NOT ACTIVE.
No report is generated if program IESCXCT2 is not defined to CICS. Program definition is missing in IUI setup. Define program using CEDA with following values:
Define Program(IESXCT2) Group(VSESPG) Language(ASSEMBLER) Reload(NO) Resident(NO) Executionset(FULLAPI) Description(IESXCT2 - BSM Format Exit) Libdef DUMP in SKJCL0.
PK86720
2009/05/26
UK46803-01C WRONG CREATION DATE SHOWN IN VSAM DIALOG.
The panel IESFILDETD on vse/iui shows wrong century in four digits for the year of CREATION DATE, such as 2086261 appeared. Since his problem VSAM file was actually created on 1986 (not on 2086) the CREATION DATE should be shown as 1986261.
PK85690
2009/04/05
UK46117-01C DEFAULT LIMIT FOR SORTED POWER ENTRIES BY TIME IS SET TO 99. THIS IS TOO LOW.
The default of 99 entries is too low. Default value should be increased to 999.
PK81238
2009/03/26
UK45222-01C CONTROL STARTUP SEQUENCE FOR DMF JOB USING IESWAITR
PK78886
2009/01/23
UK43373-01C AICA ABEND FOR IESZATDX LOOP AFTER ITEMERR CONDITION
Loop after an ITEMERR condition after PUTQ request for queue IEZATDNM. The loop ends in an AICA abend.
PK77836
2009/01/13
UK43049-01E APPLICATION IESJNET DOES NOT EXIST. INVALID SELECTION PANEL
When selecting "9 Transfer Files and Jobs to Another System", selection panel IESJNET does not exist.
PK75318
2008/11/28
UK41899-01C HARDWAIT FFF STARTING A DYNAMIC PARTITION WITH SAMPLE JOB ACCOUNTING SKJOBACC ACTIVE
PK71654
2008/10/17
UK39957-01C MISCELLANEOUS FIXES FOR Z/VSE 4.2.0 VSE/IUI

 

VSE/Interactive Interface and VSE/ICCF 8.2 components

Comp. ID CLC Description
5686-CF8-01 01C VSE/SP Unique Code
5686-CF8-02 01E z/VSE MRI Japanese
5686-CF8-02 01D z/VSE MRI English
5686-CF8-10 01C VSE/ICCF

 

Unsupported release: VSE/Interactive Interface and ICCF APARs for z/VSE V4.1

Last update: May 23, 2011

APAR
Date
PTF Contents
PM34712
2011/03/15
UK65769-09C MESSAGE INDICATOR BLINKING AND NOT RESET AFTER REDISPLAY
If only a few lines left on the screen, entering a command like MAP followed by PF7 and then PF3 end in the fact that the MESSAGE indicator is blinking and cannot be reset. Only ending the console (PF3) resets the console correctly.
PM33536
2011/03/01
UK65156-09C UPPERCASE TRANSLATION FOR SPECIAL CHARACTERS 'BA'X AND 'BB'X NOT DISPLAYABLE.
Special characters 'BA'x and 'BB'x cannot be displayed on Japanese terminal. Uppercase translation should reflect this to characters and translate to '4D'x resp. '5D'x.
PM30528
2011/01/11
UK63975-91C UPPERCASE TRANSLATION OT OME MESSAGES WITH DBCS MESSAGES NOT WORKING CORRECTLY
If default is changed to uppercase in IJBJDEF or IESJDEF, message explanation (PF9) shows garbage.
PM23716
2010/10/04
UK60949-91C ADJUST COMPILE SKELETONS FOR RPG II ON CICS TS
After PM23266, compile dialogs will use new JCL for RPG II. New parameter for RPGIAUTO program and new stub required for running RPG II compile job with new support.
PM23266
2010/09/30
UK60749-91C IUI SUPPORT FOR RUNNING RPG ON CICS TS
With RPG APARs PM16528 and PM22788, RPG II can be used on CICS TS. With this APAR skeletons RPGINST and RPGSAMPL are established to allow to run RPG without having CICS/VSE installed.
PM06335
2010/02/02
UK53953-91C PROGRAM CHECK PROTECTION EXCEPTION IN IESVRCAT IF CATALOG HAS MORE THAN 123 VOLUMES.
If a catalog has more than 123 volumes, fastpath 22 abends with
K402I CSECT ENTERED = IESAVRCAT
K403I ICCF RETURN CODE = 08
This is due to a program check protection exception.
PK92982
2009/08/12
UK49062-91C FSU STAGE 2, JOB DTRFSUCL FAILS IN CASE AN ESM IS USED.
Job DTRFSUCL gets a return code 16 in case an ESM is used instead of BSM. Conditional JCL should handle this.
PK87494
2009/07/31
UK48881-91C ABEND ATNI AND IN CASE THE TCTE INDICATES A SESSION ERROR, OLPD SHOULD NOT BE DRIVEN
After an abend ATNI as well as in case TCTEASE and TCTEUFRI are set, OLPD user screen should not be displayed since the terminal is not available. Do not handle ATCV abends and ATND. In case of a session error (TCTEINT or TCTEASE) do not continue with OLPD.
PK86692
2009/05/25
UK46802-91C WRONG CREATION DATE SHOWN IN VSAM DIALOG.
The panel IESFILDETD on vse/iui shows wrong century in four digits for the year of CREATION DATE, such as 2086261 appeared. Since his problem VSAM file was actually created on 1986 (not on 2086) the CREATION DATE should be shown as 1986261.
PK85480
2009/04/05
UK46116-91C DEFAULT LIMIT FOR SORTED POWER ENTRIES BY TIME IS SET TO 16. THIS IS TOO LOW.
The default of 16 entries is too low. Default value should be increased to 999.
PK78884
2009/01/23
UK43313-91C AICA ABEND FOR IESZATDX LOOP AFTER ITEMERR CONDITION
Loop after an ITEMERR condition after PUTQ request for queue IEZATDNM. The loop ends in an AICA abend.
PK75152
2008/11/02
UK41474-91C HARDWAIT FFF STARTING A DYNAMIC PARTITION WITH SAMPLE JOB ACCOUNTING SKJOBACC ACTIVE
Hardwait FFF due to an overlay in the GETVIS control area. Hardwait occurs with job accounting routine SKJOBACC active, starting a dynamic partition.
PK73367
2008/10/06
UK40515-91C VSAM BACKUP/RESTORE DIALOG USING SNAP (FASTPATH 3719) GENERATES INVALID JOB
PK69759
2008/07/31
UK38493-91C DOWNLEVEL CHECK WHEN INSTALLING DB2 CLIENT EDITION
Installing DB2 Client Edition on a serviced level like the version that comes with z/VSE 4.1.2, a downlevel check is issued with following APARs and PTFs
PK60248 UK33960
PK61334 UK34588
PK57531 UK34925
PK59102 UK34925
PK55304 UK33736
This is due to a COMPATIBLE WITH statement generated in the install job.
PK69519
2008/07/25
UK36287-91C AUDIT LEVEL IN DIALOG IESADMSLE CANNOT BE CHANGED FROM ANYTHING TO 1
The dialog allows to change the audit for a transaction profile from 1 to blank, 2 or 3, but changing back to 1 results in message: AUDIT MUST BE 1, 2, 3 OR BLANK.
PK69036
2008/07/25
UK36286-91E CHANGING AUDIT TO 1 FOR TRANSACTION PROFILE ON IUI DIALOG FP2811 GETS MSG1114 WITH NO EXPLANATORY.
On IUI dialog fp-2811 (iesadmbsle - maintain security profiles: resource class tcicstrn), changing an audit to 1 on transaction profile gets an error msg1114, "IESBSTL message 1114 from offset x'0BFA',(key JAMIESJ1114) not in IESTRFL", with no explanatory. The audit to 2 and 3 can be changed on iui fp-2811. A batch job on exec BSTADMIN with CH AUDIT(FAI) can change the audit to 1.
PK66632
2008/05/08
UK36731-91C INCORRECT BACKUP JOB GENERATED FOR LABELED TAPE
IUI generated backup job for a library to a labeled tape fails because TAPELABEL parameter is not generated.
PK64822
2007/04/24
UK35743-91E ADDING NON ADMINISTRATOR USER ON IUI DIALOG FP 211 GETS MSG1059, THEN THE USER CAN NOT LOGIN DUE TO NO AUTHORIZATION
On IUI dialog fp-211 (iesadmupl2), a new programmer user with type=2 can be added, but gets the error msg - 'IESXUPM message 1059 from offset x'051C',(key JAMIESJ1059) not in IESTRFL'. Then, login with the new profile user can not be allowed due to no authorization to use this application. And there is no explanation for the error msg1059.
PK64001
2007/04/09
UK35317-91C BOOTSTRAP RECORDS NEED TO BE RE-WRITTEN AFTER DY46863
PK58054
2007/12/14
UK32229-91C IESZATCO DEFAULT MODEL WITH EXTENDED DATASTREAM FOR SNA TERMINAL
In case of cross domain terminals accessing CICS/VSE, the autoinstall exit IESZATCO selects a terminal without extended data stream.
PK54868
2007/10/24
UK30529-91C MESSAGE IESA1201 IF INVALID KEY IS USED ON PANEL IESADMDA
On Japanese system, using an invalid key on panel Display System Activity will result in message IESA1201.
PK50786
2007/08/20
UK28382-91C SUPPORT OF DB2 7.5
z/VSE 4.1 support for DB2 7.5.0
DFH$SDAP skeleton for CICS shutdown.
PK54085
2007/10/05
UK29797-91C WRONG TERMINAL MODEL SELECTED IN CASE OF CROSS DOMAIN TERMINALS
The model type for autoinstall terminals Q........ coming from z/OS NVAS system will always be DFHLU2E2. These are SNA terminals where the wrong autoinstall model is slected. Model DFHLU2E2 does not have a user area TCTUA assigned, thus failing with ICCF.
PK48951
2007/08/07
UK27859-91C PROCEDURE UPCNTLSP LEADS TO INCORRECT IESCNTL ENTRIES With following input:
PK47030
2007/08/07
UK27873-91E THE NEXT SCREEN OF IUI SECURITY MAINTENANCE SCREEN(FASTPASS 281) WAS INCORRECT. WRONG POTITION AND/OR WRONG CHARACTER. IUI SECURITY MAINTENANCE SCREEN - fastpath 281 shows incorrect data, wrong position and/or wrong
PK47285
2007/06/28
UK26190-91E AT IESADMNWU NEWS MENU BY IUI FP34 DBCS JAPANESE CHARACTERS CAN NOT BE ENTERED.
When tring to enter the dbcs Japanese characters at iesadmnwu news menu opened by iui fastpath 34, it can not be entered with an input inhibitted state. The x-mark appears at left side on bottom line on the pannel and protects the input available.
PK44597
2007/06/14
UK24995-91C DISPLAY ACTIVE USERS SHOWS CICSUSER AS USERID.
If a user signs on to CICS using CESN and not IUI, the related user shows up as CICSUSER in the Display Active Users dialog.
PK38656
2007/03/12
UK22056-91D MISCELLANEOUS FIXES FOR Z/VSE 4.1.0 INTERACTIVE INTERFACE.
Solved PTMs 210, 285, 287.
NLSVERUP not correct.
PK37980
2007/03/12
UK22041-91C MISCELLANEOUS FIXES FOR Z/VSE 4.1.0 INTERACTIVE INTERFACE.
Solved PTMs 210, 285, 287.
APAR PK38542.
MXT was set to 20 which is pretty low, only 8 IUI consoles could be started in parallel.
CI size in SKVTAPE was specified for data part only, should be for the whole cluster.
Defragmentation of history file did not work due to the fact that the uncompressed history file (AUX) was copied back to the system history file.
Wrong message
RESOURCE NAME CONTAINS INVALID CHARACTERS. in dialog IESADMBSLA.
PK37949
2007/03/12
UK22041-91C ABEND AEIP (INVREQ) IN IESCONSL.
If a PAUSE is set to a value above 59 on an IUI console and if console is put to HOLD, an AEIP abend (INVREQ) occurs.
PK37948
2007/03/12
UK22041-91C IESCLEAN SHOULD ISSUE A MESSAGE WHEN CLEANUP PROCESSING IS DONE.
Customer got an abend AZI9 which was caused by IESCLEAN processing. When checking the CICS listing, he complained that cleanup processing does not issue any message.

 

VSE/Interactive Interface and VSE/ICCF 8.1 components

Comp. ID CLC Description
5686-CF8-01 91C VSE/SP Unique Code
5686-CF8-02 91E z/VSE MRI Japanese
5686-CF8-02 91D z/VSE MRI English
5686-CF8-10 91C VSE/ICCF

 

Unsupported release: VSE/Interactive Interface and ICCF APARs for z/VSE V3.1

Last update: January 30, 2009

APAR
Date
PTF Contents
PK77655
2009/01/22
UK43091 - 81C AICA ABEND FOR IESZATDX LOOP AFTER ITEMERR CONDITION
Loop after an ITEMERR condition after PUTQ request for queue IEZATDNM. The loop ends in an AICA abend.
PK71378
2008/10/06
UK40441 - 81C VSAM BACKUP/RESTORE DIALOG USING SNAP (FASTPATH 3719) GENERATES INVALID JOB
PK69831
2008/07/31
UK38476 - 81C DOWNLEVEL CHECK WHEN INSTALLING DB2 CLIENT EDITION
Installing DB2 Client Edition on a serviced level like the version that comes with z/VSE 4.1.2, a downlevel check is issued with following APARs and PTFs
PK60248 UK33960
PK61334 UK34588
PK57531 UK34925
PK59102 UK34925
PK55304 UK33736
This is due to a COMPATIBLE WITH statement generated in the install job.
PK66417
2008/05/28
UK36721 - 81C INCORRECT BACKUP JOB GENERATED FOR LABELED TAPE
IUI generated backup job for a library to a labeled tape fails because TAPELABEL parameter is not generated.
PK58053
2007/12/14
UK32227 - 81C IESZATCO DEFAULT MODEL WITH EXTENDED DATASTREAM FOR SNA TERMINAL
In case of cross domain terminals accessing CICS/VSE, the autoinstall exit IESZATCO selects a terminal without extended data stream.
PK52736
2007/10/05
UK29783 - 81C WRONG TERMINAL MODEL SELECTED IN CASE OF CROSS DOMAIN TERMINALS
The model type for autoinstall terminals Q........ coming from z/OS NVAS system will always be DFHLU2E2. These are SNA terminals where the wrong autoinstall model is selected. SNA terminals get model DFHLU2E2 selected in case of SNA terminals coming cross domain.
PK43473
2007/06/14
UK24401 - 81E SUPPORT FOR 3592 TAPE HARDWARE ENCRYPTION.
Support for tape encryption and other miscellaneous enhancements.
Hardware configuration dialog will be changed, allocation and size parameters for the POWER partition in FSU stage 2 can be up to 6 digits in kilo bytes.
PK43473
2007/06/14
UK24400 - 81E SUPPORT FOR 3592 TAPE HARDWARE ENCRYPTION.
Support for tape encryption and other miscellaneous enhancements.
Hardware configuration dialog will be changed, allocation and size parameters for the POWER partition in FSU stage 2 can be up to 6 digits in kilo bytes.
PK43473
2007/06/14
UK24398 - 81D SUPPORT FOR 3592 TAPE HARDWARE ENCRYPTION.
Support for tape encryption and other miscellaneous enhancements.
Hardware configuration dialog will be changed, allocation and size parameters for the POWER partition in FSU stage 2 can be up to 6 digits in kilo bytes.
PK43473
2007/06/14
UK24397 - 81A SUPPORT FOR 3592 TAPE HARDWARE ENCRYPTION.
Support for tape encryption and other miscellaneous enhancements.
Hardware configuration dialog will be changed, allocation and size parameters for the POWER partition in FSU stage 2 can be up to 6 digits in kilo bytes.
PK43465
2007/04/26
UK24402 - 81C DISPLAY ACTIVE USERS SHOWS CICSUSER AS USERID.
If a user signs on to CICS using CESN and not IUI, the related user shows up as CICSUSER in the Display Active Users dialog.
PK38806
2007/02/12
UK21988 - 81H STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Wrong maximum value for cylinders in help panel.
TPA tape definition - wrong description.
PK38806
2007/02/12
UK21983 - 81E STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Wrong maximum value for cylinders in help panel.
TPA tape definition - wrong description.
PK38806
2007/02/12
UK21982 - 81D STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Wrong maximum value for cylinders in help panel.
TPA tape definition - wrong description.
PK38806
2007/02/12
UK21961 - 81A STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Wrong maximum value for cylinders in help panel.
TPA tape definition - wrong description.
PK38542
2007/02/12
UK21960 - 81C STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Due to the fact that MXT was set to 20 which is pretty low, only 8 IUI consoles could be started in parallel. The MXT value is specified as an overwrite in the startup job.
NCP dialogs rework.
CI size in SKVTAPE was specified for for data part only, should be for the whole cluster.
TPA tape selection in hardware configuration incomplete.
PK36627
2007/01/08
UK21003 - 81C ABEND AEIP (INVREQ) IN IESCONSL.
If a PAUSE is set to a value above 59 on an IUI console and if console is put to HOLD, an AEIP abend (INVREQ) occurs. The abend occurs because the timer transaction IECT is started with the specified value of PAUSE as INTERVAL. The syntax for INTERVAL is however hhmmss, so 60 seconds have to be entered as 100.
PK35764
2006/12/12
UK20356 - 81C IESCLEAN SHOULD ISSUE A MESSAGE WHEN CLEANUP PROCESSING IS DONE.
Customer got an abend AZI9 which was caused by IESCLEAN processing. When checking the CICS listing, he complained that cleanup processing does not issue any message.
PK35149
2006/12/05
UK20162 - 81A DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions.
PK35149
2006/12/05
UK20163 - 81D DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions.
PK35149
2006/12/05
UK20164 - 81E DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions.
PK35149
2006/12/05
UK20165 - 81H DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions.
PK30358
2006/11/28
UK20021 - 81E AT IESADMNWU NEWS MENU BY IUI FP34 DBCS JAPANESE CHARACTERS CAN NOT BE ENTERED.
When tring to enter the dbcs Japanese characters at iesadmnwu news menu opened by iui fastpath 34, it can not be entered with an input inhibitted state. The x-mark appears at left side on bottom line on the pannel and protects the input available.
PK34613
2006/11/15
UK19659 - 81C DEFAULT MODEL FOR NON SNA TERMINALS RESET BY CICS TO A DFHLU0M2.
Customer got message K761I INSUFFICIENT TCTUA SIZE FOR TRMID=L100 this is due to the fact that for a local non SNA terminal model DFHLU0M2 was selected instead of any VSE model with a userarealength of 255. The default type for non SNA terminals should be VSE23782.
PK33776
2006/11/15
UK19662 - 81C SECURITY SETUP FOR REPORT CONTROL FEATURE IS INCOMPLETE.
The security definitions for the RCF facilities are correct in skeleton SKRCFSEC, however, GROUP1 should get PERMITS to access.
SKRCFSEC needs to run in order to allow access to RCF printers and reports. With CICS APAR PK11491 installed, a security check will be made (with z/VSE 3.1.1 or later) on all RCF operations like CEOS, CEMS or also EXEC CICS SPOOLOPEN.
This is regardless if the new security concept is used or not. The check will fail unless the RCF facilities are not defined and the related users/groups have access. This is done with skeleton SKRCFSEC.
PK32566
2006/10/09
UK18593 - 81C VTAM STARTUP JOB SHOULD REFLECT PRD2.SCEEBASE AND PRD2.PROD IN LIBDEF SETUP.
Customer had added additional steps for DMF reporting and printing CICS statistics to the VTAM startup job. This requires PRD2.SCEEBASE and PRD2.PROD (for DFSORT) in the search chain.
Include PRD2.PROD in search chain and change to temporary LIBDEFS.
PK30895
2006/09/06
UK17740 - 81A TRANSLATION ERRORS IN GERMAN SYSTEM
Several explain panels are truncated.
PK28294
2006/08/01
UK16727 - 81C ILLEGAL STARTING POSITION SETTING ON REDISPLAY OPERATION GETS ABEND ASRA.
ERRONEOUSLY TYPING -M OR -H AND PRESSING PF7(BWD) TO SKIP ALL logging items of the last minutes or hours and to continue paging backward causes abend asra. In other words, iui fp-31 console redisplay operation gets msgdfhap0001 if there is no number following -(minus) sign.
F2 0103 DFHAP0001 DBDCCICS AN ABEND (CODE 0C7/AKEA) HAS OCCURRED AT OFFSET X'0001A498' IN MODULE IESCONSL
F2 0103 DFHME0116 DBDCCICS (MODULE:DFHMEME) CICS SYMPTOM STRING FOR MESSAGE DFHAP000 IS PIDS/564805400 LVLS/411 MS/DFHAP0001 RIDS/DFHSRP PTFS/VSE411 AB/S00C7 AB/UAKEA RIDS/IESCONSL ADRS/0001A498.
This APAR is related to DY46554.
PK23632
2006/07/21
UK16411 - 81C MESSAGE IESA1202 RECEIVED ERROR 13 FROM IESCRIO WHEN SENDING WITH MAP LIBP
Customer got following messages:
IESV0089I FOLLOWING MESSAGE(S) FROM PROGRAM 'IESLIBD', OFFSET X'274C'.
IESA1202I RECEIVED ERROR 13 FROM IESSCRIO WHEN SENDING WITH MAP LIBP.
IESV0089I FOLLOWING MESSAGE(S) FROM PROGRAM 'IESFPIP', OFFSET X'3CA4'.
IESA1202I RECEIVED ERROR 13 FROM IESSCRIO WHEN SENDING WITH MAP ADMSL.
This is mainly driven by the fact that during recovery process, the user map field USRMSAD is not cleared.
PK27588
2006/07/07
UK16034 - 81A TRANSLATION ERRORS IN GERMAN SYSTEM
SIP$MSG, message 170 is invalid.
On panel TAS$SEC4 the variable for YES is used wrong (not changed to 1).
Some CICS Panel Helps words are cut after column 68.
On panel IESADMSL.IESGDEF there is a selection 9 shown.
PK26887
2006/06/29
UK15825 - 81C IJSYSR1 LIBRARY HAS A RETENTION PERIOD OF 7 DAYS AFTER PTF APPLICATION.
After PTF application, IJSYSR1 has a retention period of 7 days. If a subsequent application is done within this period, overlap on unexpired file message will be issued.
Retention period of IJSYSR1 is 7 days, should be zero days. End of step instead of end of comment in SKBSTSAV. Query models used as default models in autoinstall.
PK24287
2006/05/12
UK14212 - 81C PROVIDE BSTCNTL FILE MIGRATION UTILITY Migration tool BSTSAVER is used to migrate BSTCNTL file from z/VSE 3.1.1 to a newer release.
The program saves the contents of the file into a VSE library member which can be used on the new system to load the file.
The library member consists of BSTADMIN control statements.
 
PK21715
2006/03/24
UK12887 - 81C USER TRANSACTION DOES NOT WORK IF INVOKED BY REXX.
USER transaction does not work if invoked by REXX. IESDUSR only allows console id CNSL and m4lg, this should be extended to also allow console id REXX.
If transaction USER is issued from a REXX procedure by 'MSG xx,DATA=USER' command, there is no output received by the procedure. This is due to the fact, that the transaction checks for the console id. It will only work in case the console id is 'CNSL' or 'm4lg'. It also should allow 'REXX'.
In the procedure the console name used should be REXX: ACTIVATE NAME REXX PROFILE REXNOR
PK20032
2006/02/24
UK12041 - 81C ABEND AEIZ IN AUTOINSTALL PROGRAM IESZATDX AFTER LONG TIME NOT RECYCLED.
Abend AEIZ occurred on a WRITEQ TS with APPLNAME. Since CICS was not recycled for a long time and TS is started warm, TS records accumulated.
Autoinstall program contained debug code writing to TS queue without reading or purging records.
PK19519
2006/02/08
UK11519 - 81A DISPLAY STORAGE LAYOUT DIALOG DOES NOT WORK ON GERMAN SYSTEM.
There are no values shown for SVA size (24 bit) and all following. Caused by this fact, it is not possible to display storage values for another partition since the entry field for the partition is also overlayed.
PK17362
2006/01/20
UK10909 - 81C IESUPDCF SHOULD SUPPORT PROGRAMMER ID TO BE UPDATED.
IESUPDCF does not allow to change the Programmer ID field, to change it, the dialog must be used. IESUPDCF should be extended to allow batch upgrade.
PK17952
2006/01/18
UK10857 - 81E APPLICATIONS IN SELECTION PANEL IESADMSL.IESJDEF ARE NOT CORRECT.
On selection IESADMSL.IESJDEF, applications IESJSAM & IESJVTOC do not exist. The selection panel contains invalid application names.
PK17213
2006/01/02
UK10441 - 81H MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK17213
2006/01/02
UK10440 - 81E MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK17213
2006/01/02
UK10427 - 81D MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK17213
2006/01/02
UK10426 - 81A MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK17212
2006/01/02
UK10425 - 81C MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK15771
2005/12/01
UK09549 - 81C JOB ACCOUNTING ROUTINE SKJADACC SHOULD DEFINE VSAM CLUSTER.
Job accounting established with SKJADACC requires a VSAM file SMF.ACCT.FILE. This file should be defined within the skeleton.
PK15356
2005/11/24
UK09359 - 81C RESOURCE SECURITY LEVEL MIGRATION SUPPORT.
New security concept introduced with PK10699 allows to define new security resources. Some of the new resources match the RSL type security of CICS/VSE. This APAR will provide migration support for RSL related security definition from CICS/VSE to the new security concept.
PK13189
2005/11/03
UK08648 - 81C LVTOC SHOWS WRONG FREE SPACE INFORMATION ON FAT DASD WITH MORE THAN 32K CYLINDERS.
PK13556
2005/10/19
UK08220 - 81C NEW SECURITY SUPPORT FOR Z/VSE 3.1.1.
After adding a list of resources to the FACILITY class, a user P001 was included on the access list for the resource DFHRCF.BRSL05
Then in IUI fastpath 281 option 9 was chosen.
In the following panel option 6 = ACCESS LIST was used for DFHRCF.BRSL05.
Pressing ENTER ends in X PROG 755.
PK12885
2005/10/05
UK07819 - 81C INITIAL INSTALLATION FAILS WITH MESSAGE IESI0102 WITH EXACTLY 256 OR 257 DISKS CONFIGURED.
With 256 disk devices in IOCP, customer got message MSGIESI0102ASPECIFY IPLADD CMD FOR 54 DASD DEVICES TYPE AS SYSRES.
The logic seems to be wrong checking for minimum configuration.
PK12555
2005/09/28
UK07648 - 81C COMMENTS FSU STAGE 2 INCORRECT.
At the end of Stage 2 of FSU, an invalid fastpath was shown in case of an FSU from 2.7.x or a 3.1 refresh.
PK10701
2005/09/20
UK06614 - 81H NEW SECURITY SUPPORT FOR Z/VSE 3.1.1 (NLS).

New security concept support with Interactive Interface.
New dialog 'Security Maintenance' fastpath 28.
PK10701
2005/09/20
UK06603 - 81E NEW SECURITY SUPPORT FOR Z/VSE 3.1.1 (NLS).

New security concept support with Interactive Interface.
New dialog 'Security Maintenance' fastpath 28.
PK10701
2005/09/20
UK06578 - 81D NEW SECURITY SUPPORT FOR Z/VSE 3.1.1 (NLS).

New security concept support with Interactive Interface.
New dialog 'Security Maintenance' fastpath 28.
PK10701
2005/09/20
UK06577 - 81A NEW SECURITY SUPPORT FOR Z/VSE 3.1.1 (NLS).

New security concept support with Interactive Interface.
New dialog 'Security Maintenance' fastpath 28.
PK10699
2005/09/20
UK06576 - 81C NEW SECURITY SUPPORT FOR Z/VSE 3.1.1.

New security concept support with Interactive Interface. New dialog 'Security Maintenance' fastpath 28.
With this BSM control file the BSM does not only protect transactions (resource class name TCICSTRN), it also protects RSL resources with the resource class names ACICSPCT, DCICSDCT, FCICSFCT, JCICSJCT, MCICSPPT, SCICSTST, the logon to CICS as application by class APPL, and the general purpose class FACILITY (used for example by DITTO).
New security concept is defined and maintained using the BSTADMIN utility or using the Interactive Interface dialogs introduced with this APAR.
For more details see following books:
PK11714
2005/09/14
UK07222 - 81C PARAMETER IN CALL OF ARIPRPC PROCEDURE IS TOO LONG.

Introducing the DBNAME in the DB2 compile skeletons, the maximum length of the PARM operand was not considered. The parameters have to be reworked.
DB2 pre processor program ARIPRPx was issued with a parameter longer than 100 characters.
PK08467
2005/07/07
UK05148 - 81C DFHSI1580D VE31CICS PLTPI PROGRAM SUPPDUMP HAS ABENDED, CODE AEIN.

If dump suppression is activated with skeleton SKSUPDMP, DUPREC condition comes up when CICS TS is started WARM or EMER if suppression is activated at PLT time.
CICS startup stops with message:
DFHSI1580D VE31CICS PLTPI program SUPPDUMP has abended,code AEIN.
Reply GO or CANCEL.
PK06656
2005/06/02
UK04038 - 81C MESSAGE 'ORIGIN LARGER THAN END' ON PANEL IESFILCFRE DEFINING SPACE

In case of a 3 digit cylinder number for the ending extent on panel IESFILCFRE - Volume Free Space Information, the dialog issues message indicating that the origin of the desired allocation is lower than the end cylinder of the available extent.
PK04698
2005/04/25
UK02709 - 81C OLPD DOES NOT HANDLE SRP SECOND OPERAND CORRECTLY. OPERAND AND PSW ANALYSIS IS NOT SHOWN.

OLPD tried to analyze the second operand of an SRP instruction which should not be the case.
PSW and operand analysis is not showing the related storage areas in all cases.
PK02383
2005/03/21
 
UK01607 - 81C DELETE SKELETONS FOR LE LOCALES AND OS 390 API

After FSU, OS/390 API product and LE DBCS Locales are still installed on a version 2 level (products 06675V and 06675M if FSU from 2.7.x, or products 06665V and 06665M in case of an FSU from 2.6.x). Both products should be deleted before the z/VSE 3.1 version is installed.
Job DELTCPIP should not delete phases $SOCKLST, $SOCKOPT and $EDCTCPV.
On Japanese system, using an invalid key on panel Display System Activity will result in message IESA1201.
PK01182
2005/02/21
 
UK00699 - 81C DISPLAY ACTIVE USER LIST INCORRECT AFTER NODE ERROR (DFHZNAC)

Terminating the Display Active Users dialog using the emulation disconnect function (via node error program), after signing on again, all users are displayed twice.
This is due to the fact that the recovery function of IESDUSR works with the terminal id retrieved from the EIB, the EIB however is already cleared.
1. Using a zero terminal id leads to the fact that TS storage does not get freed after a terminal error (DFHZNAC).
More over, if CSNE is defined with TASKDATALOC(ANY), recovery processing for IUI fails with abend AEZC, thus main purpose of the recovery process like freeing allocated storage does not take place.
2. Some CICS Listener Definition Panels (Transaction EZAC) do not correctly display the port number defined for a CICS Listener, if this port number is greater than 32768 (instead of the correct port number, a number smaller than 32768 is displayed).
The same problem exists for the EZACIC02 listener (transaction EZAL) when issueing EZY messages that include port numbers in their text.
1. In following routines, the recovery process was changed:
IESBQUR Batch Queue Maintenance
IESDUSR Display Active Users
IESIMSG Retrieve Message from ICCF
IESLQDP Display Message Log
IESNEWS Maintain News Record
IESVTOCR Display VTOC
IESXSYN Maintain Synonym Table
INWMPRIN Print HTF Member
INWMRXS1 HTF fulist
INWMRXS5 Move file HTF to ICCF
INWMSHAR HTF share a file
2. Ensure display of correct port numbers.
PK01123
2005/02/21
 
UK00689 - 81C SUPPRESS OLPD SCREEN FOR ABENDS AZCT AND ATNB

After a time out happened using DITTO edit function, abend AZCT followed by an ATNB is issued. For both abends, OLPD should not try to send any data to the terminal thus suppress the display of the OLPD user screen.

 

VSE/Interactive Interface and VSE/ICCF 7.1 components

Comp. ID CLC Description
5686-CF7-01 81C VSE/SP Unique Code
5686-CF7-02 81H z/VSE MRI Spanish
5686-CF7-02 81E z/VSE MRI Japanese
5686-CF7-02 81D z/VSE MRI English
5686-CF7-02 81A z/VSE MRI German
5686-CF7-10 81C VSE/ICCF

 

Unsupported release: VSE/Interactive Interface and ICCF 6.7 APARs for VSE/ESA V2.7

Last update: December 12, 2006

APAR
Date
PTF Contents
PK35451
2006/12/11
UK20315 - 75C IESCLEAN SHOULD ISSUE A MESSAGE WHEN CLEANUP PROCESSING IS DONE.
Customer got an abend AZI9 which was caused by IESCLEAN processing. When checking the CICS listing, he complained that cleanup processing does not issue any message.
PK35097
2006/11/23
UK19852 - 75C VTAPE START JOB FOR SERVER PARTITION SHOULD ALLOW DIFFERENT TCP/IP PARTITIONS.
Startup job SKVTASTJ uses default suffix '00' for TCP/IP.
A // OPTION SYSPARM='00' should be added to the skeleton to show what to change in case of using multiple TCP/IP partitions.
PK34612
2006/11/23
UK19813 - 75A DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions.
PK34612
2006/11/23
UK19814 - 75D DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions.
PK34612
2006/11/23
UK19815 - 75E DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions.
PK34612
2006/11/23
UK19816 - 75H DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions.
PK30826
2006/10/09
UK18591 - 75C VTAM STARTUP JOB SHOULD REFLECT PRD2.SCEEBASE AND PRD2.PROD IN LIBDEF SETUP.
Customer had added additional steps for DMF reporting and printing CICS statistics to the VTAM startup job. This requires PRD2.SCEEBASE and PRD2.PROD (for DFSORT) in the search chain.
Include PRD2.PROD in search chain and change to temporary LIBDEFS.
PK23850
2006/05/22
UK14657 - 75C ILLEGAL STARTING POSITION SETTING ON REDISPLAY OPERATION GETS ABEND ASRA.
ERRONEOUSLY TYPING -M OR -H AND PRESSING PF7(BWD) TO SKIP ALL logging items of the last minutes or hours and to continue paging backward causes abend asra. In other words, iui fp-31 console redisplay operation gets msgdfhap0001 if there is no number following -(minus) sign.
F2 0103 DFHAP0001 DBDCCICS AN ABEND (CODE C7/AKEA) HAS OCCURRED AT OFFSET X'0001A498' IN MODULE IESCONSL.
F2 0103 DFHME0116 DBDCCICS (MODULE:DFHMEME) CICS SYMPTOM STRING FOR MESSAGE DFHAP000 IS PIDS/564805400 LVLS/411 MS/DFHAP0001 RIDS/DFHSRP PTFS/VSE411 AB/S00C7 AB/UAKEA RIDS/IESCONSL ADRS/0001A498
This APAR is related to DY46513.
PK19892
2006/02/20
UK11867 - 75C ABEND AEIZ IN AUTOINSTALL PROGRAM IESZATDX AFTER LONG TIME NOT RECYCLED.
Abend AEIZ occurred on a WRITEQ TS with APPLNAME. Since CICS was not recycled for a long time and TS is started warm, TS records accumulated.
Autoinstall program contained debug code writing to TS queue without reading or purging records.
PK18513
2006/01/25
UK11104 - 75A (SIP) MESSAGE 141 CONTAINS SEQUENCE NUMBERS IN COLUMN 72-80.
Message 141 has sequence numbers in colunm 72-80.
Message is not displayed, text of message is:
JOBNAME-PREFIX OF THE GENERATED JOB(S) is "DMP" (E.G. &).
Deleting VSE dumps via IUI in his VSE/ESA 2.7.3 leads to error message.
Member DTRLFRE2 shows message:
SETMSG PRB$IDH 0124 SETMSG MG04 SIP 141 SIP$MSG.
PK16071
2005/12/19
UK10213 - 75H MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK16071
2005/12/19
UK10212 - 75E MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK16071
2005/12/19
UK10210 - 75D MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK16071
2005/12/19
UK10209 - 75A MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK15903
2005/12/19
UK10189 - 75C MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced.
PK11025
2005/09/14
UK07122 - 75C PARAMETER IN CALL OF ARIPRPC PROCEDURE IS TOO LONG.

Introducing the DBNAME in the DB2 compile skeletons, the maximum length of the PARM operand was not considered. The parameters have to be reworked.
DB2 pre processor program ARIPRPx was issued with a parameter longer than 100 characters.
PK08401
2005/07/07
UK05120 - 75C DFHSI1580D VE31CICS PLTPI PROGRAM SUPPDUMP HAS ABENDED, CODE AEIN.

If dump suppression is activated with skeleton SKSUPDMP, DUPREC condition comes up when CICS TS is started WARM or EMER if suppression is activated at PLT time.
CICS startup stops with message:
DFHSI1580D VE31CICS PLTPI program SUPPDUMP has abended,code AEIN.
Reply GO or CANCEL.
PK06653
2005/06/02
UK04022 - 75C MESSAGE 'ORIGIN LARGER THAN END' ON PANEL IESFILCFRE DEFINING SPACE

In case of a 3 digit cylinder number for the ending extent on panel IESFILCFRE - Volume Free Space Information, the dialog issues message indicating that the origin of the desired allocation is lower than the end cylinder of the available extent.
PK04689
2005/04/25
UK02707 - 75C OLPD DOES NOT HANDLE SRP SECOND OPERAND CORRECTLY. OPERAND AND PSW ANALYSIS IS NOT SHOWN.

OLPD tried to analyze the second operand of an SRP instruction which should not be the case.
PSW and operand analysis is not showing the related storage areas in all cases.
PK03547
2005/04/07
UK02124 - 75 C ICCF SUBMIT TRUNCATES USER-DEFINED JECL KEYWORD OPERANDS. No message is issued.

The workarea size has been doubled and message K895I has been introduced:
K895I VSE/ICCF LIMIT FOR USER-DEFINED JECL KEYWORD OPERANDS EXCEEDED

ICCF Submit supports now the 5 Digit VSE/POWER DUETIME operand
PK03488
2005/04/04
UK01992 - 75C DFHAP0001 AN ABEND (CODE 0C4/AKEA) HAS OCCURRED AT OFFSET X'0000024A' IN MODULE IESOPIA

Customer got:
DFHAP0001 AN ABEND (CODE 0C4/AKEA) HAS OCCURRED AT OFFSET X'0000024A' IN MODULE IESOPIA
DFHAP0001 AN ABEND (CODE ---/ASRA) HAS OCCURRED IN EXIT PROGRAM IESOPIA AT EXIT POINT XPCABND.
The problem occurred in a CICS that did not have enough storage available.
PK00764
2005/02/18
UK00616 - 75C DISPLAY ACTIVE USER LIST INCORRECT AFTER NODE ERROR (DFHZNAC)

Terminating the Display Active Users dialog using the emulation disconnect function (via node error program), after signing on again, all users are displayed twice.
This is due to the fact that the recovery function of IESDUSR works with the terminal id retrieved from the EIB, the EIB however is already cleared.
1. Using a zero terminal id leads to the fact that TS storage does not get freed after a terminal error (DFHZNAC).
More over, if CSNE is defined with TASKDATALOC(ANY), recovery processing for IUI fails with abend AEZC, thus main purpose of the recovery process like freeing allocated storage does not take place.
2. Some CICS Listener Definition Panels (Transaction EZAC) do not correctly display the port number defined for a CICS Listener, if this port number is greater than 32768 (instead of the correct port number, a number smaller than 32768 is displayed).
The same problem exists for the EZACIC02 listener (transaction EZAL) when issueing EZY messages that include port numbers in their text.
1. In following routines, the recovery process was changed:
IESBQUR Batch Queue Maintenance
IESDUSR Display Active Users
IESIMSG Retrieve Message from ICCF
IESLQDP Display Message Log
IESNEWS Maintain News Record
IESVTOCR Display VTOC
IESXSYN Maintain Synonym Table
IESXSYN Maintain Synonym Table
INWMPRIN Print HTF Member
INWMRXS1 HTF fulist
INWMRXS5 Move file HTF to ICCF
INWMSHAR HTF share a file
2. Ensure display of correct port numbers.
PQ99437
2005/01/18
UQ96900 SUPPRESS OLPD SCREEN FOR ABENDS AZCT AND ATNB

After a timeout happened using DITTO edit function, abend AZCT followed by an ATNB is issued. For both abends, OLPD should not try to send any data to the terminal thus suppress the display of the OLPD user screen.
PQ98402
2004/12/20
UQ96205 ABEND AKEA 0C4 IN IESFPIP OFFSET '0C0E'X

In case a connection error (DFHZNAC) occurs while sign on processing is active, the sign on program passes control to IESFPIP without further checking.
PQ97480
2004/11/22
UQ95259 ABEND AEZD IN PROGRAM IESDUSR

IESDUSR is also called in case of recovery, so it should run in execution key CICS.
Abend AEZD happened for program IESDUSR in case of recovery processing got activated after a networking problem (DFHZNAC).
PQ95597
2004/10/15
UQ93838
 
MINOR TRANSLATION ERRORS IN VSE/ESA 2.7 JAPANESE
PQ95426
2004/10/12
UQ93741
 
MINOR TRANSLATION ERRORS IN VSE/ESA 2.7 GERMAN

PQ92086
2004/09/15
UQ91059
 
SUPPORT OF DB2 7.4 IN VSE/ESA 2.7.

Installation and FSU will support DB2 7.3.
Compile dialogs and stored procedure samples changed to reflect the new release.
PQ93348
2004/08/30
UQ92264
UQ92245
UQ92244
UQ92243
DISPLAY ACTIVE USERS SHOWS CONSOLE USERS WITH PRESET SECURITY.

PQ93346
2004/08/30
UQ92238
 
DISPLAY ACTIVE USERS SHOWS CONSOLE USERS WITH PRESET SECURITY.

PQ93354
2004/08/27
UQ92189
 
AICA IN AUTOINSTALL PROGRAM IESZATDX

The loop occurred after an INQUIRE TERMINAL getting INVEQ. This condition was not handled correctly.
PQ92624
2004/08/23
UQ91992
 
3590-TPA DEVICES ARE NOT LISTED IN PRODUCT INSTALLATION DIALOG

Some of the IUI dialogs will not allow to use 3590 addresses. A message is issued that the drive is invalid.
The default file definition for various files of the Interactive Interface were defined with STRINGS(1).
To allow parallel usage, STRINGS was increased.
PQ90883
2004/07/26
UQ90444
UQ90443
UQ90438
UQ90437
ON A LARGE DASD 3390, VSAM SPACE VALUES ARE INCORRECT ON PANEL IESFILCSP

Panel IESFILSPC shows incorrect values for a big 3390 device. NLS part.
PQ90882
2004/07/26
UQ90410
 
ON A LARGE DASD 3390, VSAM SPACE VALUES ARE INCORRECT ON PANEL IESFILCSP

IUI panel IESFILCSPC is showing incorrect VSAM information on D/T3390. LISTCAT showing cylinders instead of tracks for large devices.
PQ89761
2004/06/17
UQ89596
 
TRANSACTION EZAL IS RECEIVING MESSAGE CEE3200S AND AICA ABEND

The CICS trace shows an AICA abend in transaction EZAL.
Problem shows up due to the performance improvements with TCP/IP 15D.
The AICA seems to be caused by a loop.
The loop is due to incompletely clearing of a mask larger than 256.
PQ89307
2004/05/27
UQ88804
 
AUTOINSTALL FOR CROSS DOMAIN TERMINALS FAILS
PQ88605
2004/05/19
UQ88494
 
MESSAGE M432I DURING PTF APPLICATION

PTF application of a PSP bucked ended in message
M432I AUXILIARY HISTORY FILE CONTAINS INVALID RBA F1FFFF.LAST VALID RBA WAS 000000
Problem still there after compression of history file and switching off OEM software. It finally turned out that increasing the partition size solved the problem.
PQ86925
2004/04/08
UQ86991
 
ABENDS ASRA AND ASRA WITH OLPD PROGRAM IESOPIA
PQ84675
2004/02/13
UQ85076
 
ABEND TB04 IN HARDWARE CONFIGURATION DIALOGUE.

Abend TB04 occurred due to an invalid line.
Remove line
d$$021**3590-TPATAPE 9 TPA 08 3590ZZ
in DTR$DEVT in ICCF library 50.
PQ80874
2004/01/22
UQ82911
UQ82908
UQ82906
UQ82852
VARIOUS MINOR ERRORS VSE/ESA 2.7

Support of 3592 tape drive (NLS) in Interactive Interface
PQ80873
2004/01/22
UQ82851
 
VARIOUS MINOR ERRORS VSE/ESA 2.7
PQ81441
2003/11/28
UQ82521
UQ82519
UQ82517
UQ82514
USER PROFILE MAINTENANCE DIALOG ALLOWS UPDATE ON READ ONLY CONTROL FILE (NLS)

If IESCNTL is defined to CICS with BROWSE and READ accesss only, User Profile Maintenance allows to add or alter users without any message about read only access. The added user does not show up in the control file, alters do not take place.
PQ81297
2003/11/28
UQ82510 USER PROFILE MAINTENANCE DIALOG ALLOWS UPDATE ON READ ONLY CONTROL FILE

If IESCNTL is defined to CICS with BROWSE and READ accesss only, User Profile Maintenance allows to add or alter users without any message about read only access. The added user does not show up in the control file, alters do not take place.
PQ79918
2003/10/24
UQ81352 TIMEMAXEX VALUE FOR ICCF USERS NOT CORRECT IF LARGER THAN 32768

If the TIMEMAXEX value is changed to a value higher than 32768 using the user profile maintenance dialog, any subsequent usage of the dialog will reset the specified value to
32768 - entered value.
Customer had set to 65535 which resulted in a TIMEMAXEX value of 1. Such a low value causes problems since the related user hardly can run any ICCF task in the pseudo partition.

SKTCPSTR, SKVCSSTJ and SKVTASTJ need to be changed.

Delete FSU stage 2 jobs from IJSYSRS
PQ78158
2003/09/12
UQ79989 SKDFHDU ASSGN FOR SYS009 (PRINTER) IS MISSING

SKDFHDUP and print jobs PRTDUMPA, PRTDUMPB, PRTDUC2A and PRTDUC2B are not correct, the assignment for SYSLST is missing.
A security check will be done before invoking the transaction.
Generating multiple NCP lines ends with a TB01 abend (too many tables open).
PQ76821
2003/07/29
UQ78793
UQ78792
UQ78791
UQ78790
DATA BASE NAME IN COMPILE DIALOGS SHOULD BE ALLOWED TO HAVE 18 CHARACTERS (NLS)

Currently, the compile dialog for DB2 allows only an 8 character data base name.
DB2 allows 18 characters.
It would be more convenient to specify this in the dialog than modifying the related C$Q... skeleton.
PQ76818
2003/07/29
UQ78785 DATA BASE NAME IN COMPILE DIALOGS SHOULD BE ALLOWED TO HAVE 18 CHARACTERS (NLS)

Currently, the compile dialog for DB2 allows only an 8 character data base name.
DB2 allows 18 characters.
It would be more convenient to specify this in the dialog than modifying the related C$Q... skeleton.
PQ76622
2003/07/29
UQ78757 CICS LISTENER, AEIV ABEND IN APPLICATION PROGRAM USING LISTENER

Abend AEIV (LENGERR) occurred in an application program using CICS Listener function EXEC CICS RETRIEVE.
This is due to a change of length of the CICS Listener output area.
PQ76822
2003/07/28
UQ78782
(ICCF)
ICCF TERMINAL TIMEOUT SETTING OF exactly 3600 seconds does not work. DTSICCF has been changed to use the correct hhmmss specification for EXEC CICS START TRANSID INTERVAL.
PQ76078
2003/07/11
UQ78283 CICS SOCKET LISTENER GETS AN ABEND0C4 AT X'12' IN EZACIC02

CICS socket listener gets ABEND0C4 at x'12' in EZACIC02.
It was going along processing 200 requests when it abended.
The Program Check occurs because EZACIC02, offset 13B2, branches into an area with no executable code.
This branch is done out of an EXEC CICS call:
EXEC CICS INQUIRE, 
     TRANSACTION(EISSECTR), 
     PROGRAM(EISPGM),
     ....

Since this is not the first EXEC CICS call from EZACIC02, it see that there could be an overlay somewhere.
PQ75840
2003/07/08
UQ78183 ABEND ASRA IN IND$ FILE TRANSFER IF NOT SIGNED ON TO IUI

IND$ file transfer gets an abend ASRA in case the user is not signed on through IUI (IESN) but CESN.
PQ76075
2003/07/09
UQ78274 AUTO INSTALL EXIT IESZATDX DOES NOT WORK FOR CROSS DOMAIN TERMINALS.

A TERMIDERR is raised but the code seems to be '000000FF'.
This is due to a destroyed register for the DFHEIB control block.
PQ73692
2003/06/27
UQ76755 SUPPORT OF DB2 7.3.0 IN VSE/ESA 2.7

Support of DB2 7.3.0 for initial installation, FSU, compile dialogs and connectors.
Installation and FSU will support DB2 7.3.
Compile dialogs and stored procedure samples changed to reflect the new release.
PQ74581
2003/06/12
UQ77517 TRANSLATION ERROR ON DISPLAY SYSTEM ACTIVITY PANEL

At panel IESADMDA (path 361) field DISPATCHABLE and MXT REACHED translated wrong.
PQ71197
2003/03/11
UQ74429 GA PTF FOR VSE/ESA 2.7.0

If customer uses skeleton SKTCPSTR to modify the TCP/IP startup job, after FSU the modification is lost.
The same is true for:
PQ71145
2003/03/11
UQ74429 OLPD DOES NOT WORK AFTER A CERTAIN AMOUNT OF TIME

With PQ57091 we introduced an eye catcher for the OLPD global work area which hold the SVL address.
We additionally introduced code to validate the SVL.
If the SVL is not properly passed on to OLPD, we switched off OLPD.
We did not find out who destroys the global work area. The eye catcher of the work area is 'OLPD_GWA'.
Instead of terminating OLPD processing, we should try to load the SVL using XPI load services.
This will establish a backup way for OLPD to produce incident data.
PQ71097
2003/03/11
UQ74429 INSTALLING CICS/VSE, COMPATIBLE WITH STATEMENT ONLY GENERATED FOR DEFAULT LIBRARIES.

Installing CICS/VSE from the extended base tape, M233I is issue in case of using different target library/sublibrary than the default.
The same is true for DB2 base and the Data Propagator feature.
In addition, installing DB2 from the optional product tape, the install dialog does not install it into PRD2.DB2720.

 

VSE/Interactive Interface and VSE/ICCF 6.7 components

Comp. ID CLC Description
5686-066-01 75C VSE/SP Unique Code
5686-066-02 75H VSE/ESA MRI Spanish
5686-066-02 75E VSE/ESA MRI Japanese
5686-066-02 75D VSE/ESA MRI English
5686-066-02 75A VSE/ESA MRI German
5686-066-10 75C VSE/ICCF

 

Unsupported release: VSE/Interactive Interface and ICCF 6.6 APARs for VSE/ESA V2.6

Last update: March 20, 2006

APAR
Date
PTF Contents
PK21559
2006/03/20
UK12710 - 65C JOB ACCOUNTING ROUTINE SKJADACC SHOULD DEFINE VSAM CLUSTER

Job accounting established with SKJADACC requires a VSAM file SMF.ACCT.FILE. This file should be defined within the skeleton.
Replace DMF based job accounting routine using OS390 API by SMF type solution.
PK11986
2005/09/19
UK07345 - 65C DFHAP0001 AN ABEND (CODE 0C4/AKEA) HAS OCCURRED AT OFFSET X'0000022A' IN MODULE IESOPIA

Customer got DFHAP0001 AN ABEND (CODE 0C4/AKEA) HAS OCCURRED AT OFFSET X'0000022A' IN MODULE IESOPIA.
DFHAP0001 AN ABEND (CODE ---/ASRA) HAS OCCURRED IN EXIT PROGRAM IESOPIA AT EXIT POINT XPCABND.
The problem occurred in a CICS that did not have enough storage available.
PK08488
2005/07/08
UK05214 - 65C TRANSACTION EZAC DOES NOT DISPLAY CORRECT PORT NUMBER IF THIS IS LARGER THAN 32768.

Some CICS Listener Definition Panels (Transaction EZAC) do not correctly display the port number defined for a CICS Listener, if this port number is greater than 32768 (instead of the correct port number, a number smaller than 32768 is displayed).
The same problem exists for the EZACIC02 listener (transaction EZAL) when issueing EZY messages that include port numbers in their text.
PK05661
2005/05/13
UK03369 - 65C MESSAGE 'ORIGIN LARGER THAN END' ON PANEL IESFILCFRE DEFINING SPACE

In case of a 3 digit cylinder number for the ending extent on panel IESFILCFRE - Volume Free Space Information, the dialog issues message indicating that the origin of the desired allocation is lower than the end cylinder of the available extent.
PK04605
2005/04/25
UK02706 - 65C OLPD DOES NOT HANDLE SRP SECOND OPERAND CORRECTLY. OPERAND AND PSW ANALYSIS IS NOT SHOWN.

OLPD tried to analyze the second operand of an SRP instruction which should not be the case.
PSW and operand analysis is not showing the related storage areas in all cases.
PK00029
2005/02/09
UK00271 - 65C DISPLAY ACTIVE USER LIST INCORRECT AFTER NODE ERROR (DFHZNAC)

Terminating the Display Active Users dialog using the emulation disconnect function (via node error program), after signing on again, all users are displayed twice.
This is due to the fact that the recovery function of IESDUSR works with the terminal id retrieved from the EIB, the EIB however is already cleared.
Clean up processing for several IUI routines does not work properly due to wrong terminal id used.
In addition, the node error transactions CSNE needs to be change to TAKDATALOC(BELOW).
Using a zero terminal id leads to the fact that TS storage does not get freed after a terminal error (DFHZNAC).
More over, if CSNE is defined with TASKDATALOC(ANY), recovery processing for IUI fails with abend AEZC, thus main purpose of the recovery process like freeing allocated storage does not take place.
PQ99943
2005/01/25
UQ97092 - 65C ABEND AEZD IN PROGRAM IESDUSR

IESDUSR is also called in case of recovery, so it should run in execution key CICS.
Change CSD definition for IESDUSR..
PQ99380
2005/01/18
UQ96878 SUPPRESS OLPD SCREEN FOR ABENDS AZCT AND ATNB

After a timeout happened using DITTO edit function, abend AZCT followed by an ATNB is issued. For both abends, OLPD should not try to send any data to the terminal thus suppress the display of the OLPD user screen.
PQ98001
2004/12/14
UQ96050 ABEND AKEA 0C4 IN IESFPIP OFFSET '0C0E'X

In case a connection error (DFHZNAC) occurs while sign on processing is active, the sign on program passes control to IESFPIP without further checking. Sign on program IESIES01 should pass control to the function processor only in case the terminal is available. In case the terminal is gone due to a connection problem (DFHZNAC), sign on should perform a return.
PQ97284
2004/11/18
UQ95163
(ICCF)
ICCF SUBMIT TRUNCATES USER-DEFINED JECL KEYWORD OPERANDS. No message is issued.
The workarea size has been doubled and message K895I has been introduced:
K895I VSE/ICCF LIMIT FOR USER-DEFINED JECL KEYWORD OPERANDS EXCEEDED
PQ94095
2004/09/15
UQ92766
UQ92762
UQ92751
UQ92744
ON A LARGE DASD 3390, VSAM SPACE VALUES ARE INCORRECT ON PANEL
PQ94094
2004/09/15
UQ92743 ON A LARGE DASD 3390, VSAM SPACE VALUES ARE INCORRECT ON PANEL
PQ93343
2004/08/26
UQ92186 AICA IN AUTOINSTALL PROGRAM IESZATDX

The loop occurred after an INQUIRE TERMINAL getting INVEQ. This condition was not handled correctly.
PQ92629
2004/08/12
UQ91631
(ICCF)
Starting transaction ICCF in CICS partition without ICCF causes message DFHAP0001 ABEND0C4 at X'00004154' in DTSICCF. DTSICCF in CICS2 worked with addresses from CICSICCF and abended while reading in fetch protected CICS2 storage. DTSICCF now checks if ICCF is running in the partition which started transaction ICCF.
PQ91106
2004/07/27
UQ90932 TRANSACTION EZAL IS RECEIVING MESSAGE CEE3200S AND AICA ABEND

The CICS trace shows an AICA abend in transaction EZAL. The problem seems to be related to the $SOCKOPT phase. Problem shows up due to the performance improvements with TCP/IP 15D. Make sure if masks larger than 256 bytes are used, that everything is cleared properly.
PQ89264
2004/05/25
UQ88794 AUTOINSTALL FOR CROSS DOMAIN TERMINALS FAILS
PQ88042
2004/05/06
UQ87874 MESSAGE M432I DURING PTF APPLICATION

PTF application of a PSP bucked ended in message
M432I AUXILIARY HISTORY FILE CONTAINS INVALID RBA F1FFFF. LAST VALID RBA WAS 000000
Problem still there after compression of history file and switching off OEM software.
It finally turned out that increasing the partition size solved the problem.
PQ84985
2004/03/31
UQ86714 ABENDS ASRA AND ASRA WITH OLPD PROGRAM IESOPIA
After an AKEA abend code 0C4 in a user program, OLPD exit program IESOPIA abended with an AKEA 0C4 offset 'B02'x.
PQ78040
2003/09/05
UQ79782 SKDFHDU ASSGN FOR SYS009 (PRINTER) IS MISSING

The skeleton to print transaction dumps SKDFHDUP is not setup correctly, an assignment for the printer is missing.
PQ76621
2003/07/28
UQ78752 CICS LISTENER, AEIV ABEND IN APPLICATION PROGRAM USING LISTENER

Abend AEIV (LENGERR) occurred in an application program using CICS Listener function EXEC CICS RETRIEVE.
This is due to a change of length of the CICS Listener output area.
PQ75830
2003/07/28
UQ78589
UQ78586
UQ78579
UQ78578
DATA BASE NAME IN COMPILE DIALOGS SHOULD BE ALLOWED TO HAVE 18 CHARACTERS (NLS)

Currently, the compile dialog for DB2 allows only an 8 character data base name.
DB2 allows 18 characters.
It would be more convenient to specify this in the dialog than modifying the related C$Q... skeleton.
PQ75245
2003/07/28
UQ78573 DATA BASE NAME IN COMPILE DIALOGS SHOULD BE ALLOWED TO HAVE 18 CHARACTERS

Currently, the compile dialog for DB2 allows only an 8 character data base name.
DB2 allows 18 characters.
It would be more convenient to specify this in the dialog than modifying the related C$Q... skeleton.
PQ76077
2003/07/10
UQ78277 CICS SOCKET LISTENER GETS AN ABEND0C4 AT X'12' IN EZACIC02

CICS socket listener gets ABEND0C4 at x'12' in EZACIC02.
It was going along processing 200 requests when it abended.
The Program Check occurs because EZACIC02, offset 13B2, branches into an area with no executable code.
This branch is done out of an EXEC CICS call:
EXEC  CICS INQUIRE,
      TRANSACTION(EISSECTR),
      PROGRAM(EISPGM),
      ....

Since this is not the first EXEC CICS call from EZACIC02, it see that there could be an overlay somewhere.
PQ76347
2003/07/15
UQ78477 FSU STEP DTRFSU22 FAILS IN CASE OF A RELEASE UPGRADE

Message NO HDR1 LABEL FOUND is issued due to the fact that part SKCICCLD is restored twice in IMVERUP.Z.
PQ76072
2003/07/08
UQ78268 AUTO INSTALL EXIT IESZATDX DOES NOT WORK FOR CROSS DOMAIN TERMINALS.

Auto install exit IESZATDX does not work for cross domain terminals.
A TERMIDERR is raised but the code seems to be '000000FF'.
This is due to a destroyed register for the DFHEIB control block.
PQ74563
2003/06/27
UQ77766 SUPPORT OF DB2 7.3.0 IN VSE/ESA 2.6

Support of DB2 7.3.0 for initial installation, FSU, compile dialogues and connectors.
Installation and FSU will support DB2 7.3.
Compile dialogs and stored procedure samples changed to reflect the new release.
PQ74252
2003/05/27
UQ77061 SIGNON PROCESSING SHOULD ALLOW TCTUALOC=ANY FOR PRODCICS

The customer has specified the CICS SIT parm TCTUALOC=ANY.
The parm controls where the TCT USER AREA is getmained.
When specifying ANY the area is allocated as a 31bit address above. The module IESIES01 runs in 24 bit mode.
With the TCTUA above IESIES01 gets an ABEND0C4 offset x'7E6'.
TCTUALOC=ANY is only allowed for production CICS, DBDCCICS requires TCTUALOC=BELOW due to ICCF running in this CICS.
PQ74562
2003/05/27
UQ77056 TRANSLATION ERROR ON DISPLAY SYSTEM ACTIVITY PANEL

At panel IESADMDA (path 361) fields DISPATCHABLE and MXT REACHED are translated wrong.
PQ73863
2003/05/09
UQ76601 ESCAPE TO VM WITH AN OFFSET UNEQUAL TO 1 IS NOT WORKING

Customer had set an offset of 4 in IESJLOGO, but with this offset, PF3 EXIT to VM was not shown.
PQ70752
2003/02/21
UQ74141 OLPD IS NOT WORKING ANYMORE AFTER A CERTAIN AMOUNT OF TIME

With PQ57091 we introduced an eye catcher for the OLPD global work area which hold the SVL address.
We additionally introduced code to validate the SVL.
If the SVL is not properly passed on to OLPD, we switched off OLPD. The customer did not find out who destroys the global work area. The eye catcher of the work area is 'OLPD_GWA'.
Instead of terminating OLPD processing, we should try to load the SVL using XPI load services.
This will establish a backup way for OLPD to produce incident data.
PQ70697
2003/02/18
UQ74036 INSTALLING CICS/VSE, COMPATIBLE WITH STATEMENT ONLY GENERATED FOR DEFAULT LIBRARIES.

Installing CICS/VSE from the extended base tape, M233I is issued in case of using different target library/sublibrary than the default.
The same is true for DB2 base and the Data Propagator feature.
In addition, installing DB2 from the optional product tape, the install dialog does not install it into PRD2.DB2720.
PQ70277
2003/01/28
UQ73479
(ICCF)
PQ68047
2002/10/12
UQ72242 MESSAGE IESV1002 DISPLAYING A HIGH NUMBER OF SELECTION PANELS OR APPLICATION PROFILES
PQ66568
2002/10/16
UQ70722 SUPPORT OF NEW DSF REL 1.17 IN VSE 2.6
PQ65715
2002/09/24
UQ69983 ABEND IE08 SIGNING OFF A USER RUNNING SELECTION PANEL MAINTENANCE DIALOG
PQ65790
2002/09/02
UQ69397
UQ69396
UQ69392
UQ69385
SET DEFAULT STARTUP MODE FOR TEMPORARY STORAGE TO COLD
PQ62813
2002/07/31
UQ68571 SKELETON SKPREPC2 SHOULD FIRST APPEND DFHLIST AND THEN ADD GROUP VSESPG
The changed process for invoking node error program IESCLEAN via program link need CSNE to be defined with a TWASIZE of 400.
Changing was done with APAR PQ61787. For the standard CICS DBDCCICS, the change gets active immediately, for the CSD list VSELST2 used for PRODCICS, the change does not get active because the setup in SKPREPC2 is appending DFHLIST as last step to VSELST2.
In addition, new program skeletons for suppressing CICS dumps (SKSUPDMP) and for the GETVIS xx,RESET command issued via CCS transaction (SKCCMD) are added to ICCF library 59.
PQ61787
2002/06/07
UQ66892 CICS SHUTDOWN TAKES ABOUT 20 MINUTES

In case connection of several terminals is going down, lots of IENP transactions are started. With the delay parameter active, this slows down CICS shut down.
In order to return to the former used EXEC CICS LINK IESCLEAN, IESCLEAN needs to be changed to address mode 31 (as a CICS EXIT). Since IESCLEAN clears storage allocated by other routines in so called recovery mode, need to be changed to Execkey(CICS) (all programs are in group VSESPG.
PQ61749
2002/06/06
UQ66837 SUPERVISOR GENERATION DURING PTF APPLICATION SHOULD INCLUDE DELTA LIBRARIES IN SEARCH CHAIN
PQ61103
2002/05/17
UQ66336 IESBLDUP DOES NOT SETUP AF SECURITY FLAGS CORRECTLY.

IESBLDUP fails to set the AF security bits correctly for ADMIN or PROGrammer type users.
Migrating from a VSE/ESA 2.5 system, the migration utility tools SKSECTXS, SKSECTX2 and SKSECTX3 do not generate correct IPF tables for the merge function.
In addition, the merge function of dialog Transaction Security should support old type IPF tables generated by 2.5.
PQ60447
2002/04/30
UQ65608 INVALID VTAM STARTUP BOOK TCPAPP00.B

During startup, messages
IST1249I SYNTAX ERROR AT RECORD 2 IN MEMBER ATCCON00
IST258I STMT IN ERROR = * TCPAPP00, *
IST018I CONFIG COULD NOT BE INITIALIZED - VTAM START CONTINUES
IST523I REASON = ERROR READING VTAMLST FILE
IST314I END
occur.
This is due to a comment line not followed by any valid application definition.
PQ60250
2002/04/24
UQ65315
UQ65311
STORAGE VIOLATION CODE X'0F0C' IN DISPLAY ACTIVITY ROUTINE IESXDA

IUI SYSTEM ACTIVITY DISPLAY ( 361 , IESADMDA ) results in message:
DFHSM0102 'A storage violation (code X'0F0C') has been detected by mdule DFHSMAR
Registers are pointing to IESXDA offset '1358'x.
PQ60136
2002/04/18
UQ65160 STORAGE VIOLATION CODE X'0F0C' IN DISPLAY ACTIVITY ROUTINE IESXDA

IUI SYSTEM ACTIVITY DISPLAY ( 361 , IESADMDA ) results in message:
DFHSM0102 'A storage violation (code X'0F0C') has been detected by mdule DFHSMAR
Registers are pointing to IESXDA offset '1358'x.
PQ57744
2002/04/15
UQ64166
UQ64163
UQ64162
UQ64161
SEVERAL MINOR PROBLEMS WITH VSE/ESA 2.6
PQ57743
2002/04/15
UQ64160 SEVERAL MINOR PROBLEMS WITH VSE/ESA 2.6
PQ58394
2002/02/27
UQ63464
(ICCF)
PQ57985
2002/02/26
UQ63013
UQ63012
UQ63011
UQ63010
PANEL IESFILDETG SHOWS NUMBER OF CIs FOR EXTENDED KSDS DATASETS
PQ57099
2002/02/19
UQ62795 SHOW PF4 REMOTE APPLICATIONS ON SIGNON SCREEN ONLY IN CASE THERE ARE REMOTE APPLICATIONS
PQ57091
2002/02/14
UQ62733 OLPD IMPROVE CHECKING OF PARTITION ALLOCATION VALUES WHEN EXPLOITING ABEND OPERANDS
PQ57220
2002/02/01
UQ62331 MSGBSST24I AFTER APPLICATION OF TCP/IP SERVICE PACK 1.4C
PQ56819
2002/01/25
UQ62060 STORAGE VIOLATION (CODE X'0F0C') DURING CICS SHUT DOWN
A storage violation (code X'0F0C') detected DFHSMAR. One of the transaction storage trailer SAA was overlaid.
The buffer provided to hold output for a CEMT I TA command is obviously too small.
PQ56556
2002/01/15
UQ61805 OPERATION EXCEPTION USING VIRTUAL TAPE SERVER, CONNECTOR SERVER AND OTHER C/VSE PROGRAMS
PQ56865
2002/01/23
UQ61941 SIGNON ROUTINE IESIES01 INVOKES USER EXIT WITH NAME IESEXIT.
PQ56186
2002/01/10
UQ61657 FSU RELEASE UPGRADE FROM 2.4 OR 2.5 TO 2.6 WITH GENERATION FEATURE INSTALLED FAILS.
PQ55969
2002/01/07
UQ61359
UQ61356
UQ61352
UQ61351
SEVERAL FIXES FOR INTERACTIVE INTERFACE VSE/ESA 2.6.0 PTF 1
PQ55920
2001/12/24
UQ61350 SEVERAL FIXES FOR INTERACTIVE INTERFACE VSE/ESA 2.6.0 PTF 1
PQ54702
2001/12/10
UQ60218 STORAGE LAYOUT SHOULD ALSO SHOW VALUES FOR REXX APPLICATIONS
Using Display Storage Layout and it looks like all fields are blank when running any REXX program. It's as if there is nothing in the partition.
PQ54701
2001/12/10
UQ60218 SEVERAL FIXES FOR INTERACTIVE INTERFACE VSE/ESA 2.6.0 PTF 1

 

VSE/Interactive Interface and VSE/ICCF 6.6 components

Comp. ID CLC Description
5686-066-01 65C VSE/SP Unique Code
5686-066-02 65H VSE/ESA MRI Spanish
5686-066-02 65E VSE/ESA MRI Japanese
5686-066-02 65D VSE/ESA MRI English
5686-066-02 65A VSE/ESA MRI German
5686-066-10 65C VSE/ICCF

 

Unsupported release: VSE/Interactive Interface and ICCF 6.5 APARs for VSE/ESA V2.5

Last update: February 25, 2005

APAR
Date
PTF Contents
PQ78869
2003/09/25
UQ80409
(ICCF)
PQ76522
2003/07/22
UQ78245 CICS LISTENER, AEIV ABEND IN APPLICATION PROGRAM USING LISTENER< br/> Abend AEIV (LENGERR) occurred in an application program using CICS Listener function EXEC CICS RETRIEVE. This is due to a change in length of the CICS Listener output area.
PQ75736
2003/07/08
UQ78245 CICS SOCKET LISTENER GETS AN ABEND0C4 AT X'12' IN EZACCI02
CICS socket listener ABEND0C4 at x'12' in EZACIC02. The Program Check occurs because EZACIC02, offset 13B2, branches into an area with no executable code. This branch is done out of an EXEC CICS call:
EXEC CICS INQUIRE,
     TRANSACTION(EISSECTR), 
     PROGRAM(EISPGM),   
     ....
Since this is not the first EXEC CICS call from EZACIC02, it is possible that there could be an overlay somewhere.
PQ65460
2002/09/02
UQ69376 ABEND IE08 SIGNING OFF A USER RUNNING SELECTION PANEL MAINTENANCE DIALOG
PQ58998
2002/05/13
UQ65844 CICS SHUTDOWN TAKES ABOUT 20 MINUTES
After APAR PQ52476, the CICS hang did not occur anymore, but due to the DELAY(1) parameter inserted in IESZNEP, CICS shutdown takes about 20 minutes.
PQ60449
2002/05/03
UQ65777 ABEND AKEA IN PROGRAM IESSCRIO OFFSET '177E'X
Problem happens randomly, is related to user applications with own user modified panel selection and possibly help function.
PQ57607
2002/02/19
UQ62868
UQ62867
UQ62866
UQ62865
 
PANEL IESFILDETG SHOWS NUMBER OF CIs FOR EXTENDED KSDS DATASETS
Panel IESFILDETG shows number of bytes, but in case of an extended KSDS, the used High RBA field from VSAM does not contain the number of bytes but the number of control intervals.
The panel should show both.
PQ57473
2002/02/11
UQ62545
UQ62544
UQ62543
UQ62539
SEVERAL MINOR PROBLEMS WITH VSE/ESA 2.5
PQ57472
2002/02/11
UQ62537
 
SEVERAL MINOR PROBLEMS WITH VSE/ESA 2.5
PQ57217
2002/02/01
UQ62330
 
MSGBSST24I AFTER APPLICATION OF TCP/IP SERVICE PACK 1.4C
PQ55927
2002/01/28
UQ62166
 
SHOW PF4 REMOTE APPLICATIONS ON SIGNON SCREEN ONLY IN CASE THERE ARE REMOTE APPLICATIONS
PQ55137
2002/01/28
UQ62143
 
OLPD IMPROVE CHECKING OF PARTITION ALLOCATION VALUES WHEN EXPLOITING ABEND OPERANDS
PQ56618
2002/01/22
UQ62080
 
SIGNON ROUTINE IESIES01 INVOKES USER EXIT WITH NAME IESEXIT.
PQ56424
2002/01/22
UQ61932
 
STORAGE VIOLATION (CODE X'0F0C') DURING CICS SHUT DOWN
 
PQ57333
2002/01/02
UQ62365
(ICCF)
PQ54326
2001/11/09
UQ59597
 
STORAGE LAYOUT SHOULD ALSO SHOW VALUES FOR REXX APPLICATIONS
PQ49437
2001/11/06
UQ54941
(ICCF)
PQ52832
2001/10/23
UQ59064
 
MIGRATE JOB NEEDS IESCNTL TO BE CLOSED IN ORDER TO RUN.
PQ53317
2001/10/16
UQ58570
 
TRANSLATION ERROR IN MESSAGE 106 OF SIP$MSG LEADS TO II ABEND MG04
PQ52476
2001/09/26
UQ57993
 
LOTS OF IENP TRANSACTIONS BEING STARTED BRINGS CICS TS DOWN
PQ51655
2001/09/07
UQ57448
 
FILE TRANSFER WITH CC OPTION CREATES WRONG PAGER HEADER LINES IN CASE OF LOGICAL RECORD LENGTH LARGER THAN 255
PQ51586
2001/08/22
UQ57060
 
ABEND AEIP IN TRANSACTION IEGM, PROGRAM IESSCRIO OFFSET X'54C'
PQ50867
2001/08/22
UQ57162
 
STORAGE VIOLATION FOR DIRECT USERS IN PANEL HIERARCHY LIST
PQ52832
2001/10/23
UQ59064
 
MIGRATE JOB NEEDS IESCNTL TO BE CLOSED IN ORDER TO RUN.
PQ50346
2001/07/11
UQ55743
 
POST/BASE PROCESSING SHOWS PANEL IESADMSE4
PQ50144
2001/07/03
UQ55477
 
ABENDAEY9 WHEN PF1 KEY IS PRESSED TO GET HELP INFORMATION ON PANEL IESBQUC
PQ50082
2001/06/28
UQ55397
 
INVALID APPLICATION PROFILE FOR POST/BASE
PQ49527
2001/06/15
UQ55036
 
REFRESH KEY IN PROGRAM DEVELOPMENT PANEL SPECIFYING A PREFIX NOT WORKING CORRECT FOR A PROGRAMMER ID
PQ49301
2001/06/10
UQ54935
 
STORAGE VIOLATION ON AN IUI SEND MAP IF CSFE IS ACTIVE
PQ48871
2001/05/25
UQ54353
 
PARSING ERROR IN IESWAITR,
DEBUGGING AID FOR IESZATDX
PQ46864
2001/04/02
UQ52845
 
MESSAGE SOURCE LANGUAGE OF THE ABENDING PROGRAM IS NOT DEFINED
PQ45663
2001/03/06
UQ51988 RELIEF OF DSA STORAGE BELOW THE LINE FOR PANEL HIERARCHY LIST IN IUI
For each IUI user, about 4 K of storage for the user status record and the panel hierarchy list (PDL) are required.
The PDL is allocated for each user, even in case the user does not have a selection panel specified as initial panel.
Users having an application as initial selection do not have a need for a PDL, the related storage can be freed immediately.
This should save about 1K of storage below the line for each user accessing an application directly after signon.
PQ46308
2001/03/05
UQ51940
UQ51939
IESINWMOB INCORROUT PROBLEM
PQ43503
2001/01/19
UQ50172
UQ50167
UQ50166
UQ50165
NLSVERUP MEMBER INCORRECT FOR ALL LANGUAGES
PQ44269
2001/01/19
UQ50164 WEB ERROR PROGRAM, DUMP DIALOG - SUPPORT OF NEW CICS TS DOMAINS
PQ43137
2000/11/17
UQ48770 ASRA IN OLPD ROUTINE IESOPIA OFFSET X'000009CA'
PQ42737
2000/10/30
UQ48300 REMOTE TRANSACTIONS CAUSE MESSAGE PROGRAM ' ' FOR TRANSACTION XXXX NOT DEFINED
For a remote transaction NATO, message "Program ' ' for transaction NATO is not available." is issued.
On CICS/VSE 2.3 when done via DFHPCT type=remote specification forces the program to "DFHCRP".
So on VSE 2.3 there was a program specified.
On CICS TS, with RDO the program name is not required when an remote system is specified. (If a program is specified it is ignored.)
 
PQ41225
2000/09/15
UQ47022 SEVERAL PROBLEMS WITH VSE/ESA 2.5 - PTF1

 

VSE/Interactive Interface and VSE/ICCF 6.5 components

Comp. ID CLC Description
5686-066-01 55C VSE/SP Unique Code
5686-066-02 55H VSE/ESA MRI Spanish
5686-066-02 55E VSE/ESA MRI Japanese
5686-066-02 55D VSE/ESA MRI English
5686-066-02 55A VSE/ESA MRI German
5686-066-10 55C VSE/ICCF

 

IBM Mainframe: Make the Extraordinary Possible

  • The mainframe is essential in today's digital world, enabling 90% of Fortune 500 companies.

IBM zEnterprise System

  • zEnterprise

    The IBM zEnterprise System extends modern mainframe capabilities for enterprises of all sizes to help cut costs, improve service, and fuel innovation for business growth.

Rate zEnterprise product