Attention:

A four-digit feature code is used to specify a component that is configurable in the IBM configurators, the eBusiness Configurator (eConfig) and the IBM Web-based Hardware Configurator, used in US and Canada. Options that do not have feature codes cannot be integrated by IBM into a system using these IBM configurators. To purchase options separately, refer to the option part number provided in this document.

Tab navigation

Tab navigation

SBB number Option number Feature code Description Form Factor Slots supported Hot-Plug capable Max quantity
Storage controllers and cache options
0005862 - 5862 Rack location U34 - - - -
C005864 - 5864 Rack location U36 - - - -
17P8568 - 7589 IBM BladeCenter RAID Battery Backup Module - - - -
46C9273 46C9272 A3FE Cisco Catalyst Switch Module 3012 for IBM BladeCenter - - - -
- 44E5692 - Cisco 4Gb FC 10 Port Switch for IBM BladeCenter - - - -
Networking1,2
- 39Y9195 - IBM BladeCenter SAS Connectivity Module5 - 3,4 Y 2
- 43W6723 - QLogic 4Gb Intelligent Pass-thru Module for IBM7 - 3,4 Y 2
- 43W6724 - Qlogic 10-port 4Gb SAN Switch Module for IBM StFF 3,4 Y 2
- 39Y9284 - Cisco Systems 4Gb 10-port Fibre Channel Module - 3,4 Y 2
- 32R1813 - Brocade 4Gb 10-port SAN Switch Module for IBM eServer BladeCenter - 3,4 Y 2
40Y1126 32R1860 3212 IBM Layer 2/3 Copper Gb Ethernet Switch Module for IBM BladeCenter - 1,2,3,4 Y 4
40Y1128 32R1861 3213 IBM Layer 2/3 Fiber Gb Ethernet Switch Module for IBM BladeCenter - 1,2,3,4 Y 4
40Y1138 39Y9316 3218 IBM BladeCenter Optical Pass-thru Module - 1,2,3,4 Y 4
40Y1142 39Y9324 3220 Server Connectivity Module for IBM BladeCenter - 1,2,3,4 Y 4
43W4398 43W4395 5450 Cisco Catalyst Switch Module 3012 for IBM BladeCenter StFF 1,2,3,4 Y 4
- 32R1859 - IBM BladeCenter Layer 2-7 Gigabit Ethernet Switch Module StFF 1,2,3,4 Y 4
44W4484 44W4483 5452 Intelligent Copper Pass-thru Module for IBM BladeCenter - 1,2,3,4 Y 4
44W4405 44W4404 1590 IBM 1/10Gb Uplink Ethernet Switch Module for IBM BladeCenter - 1,2,3,4 Y 4
43W3604 43W3584 5453 IBM BladeCenter S SAS RAID Controller Module3,4,5 - 3,4 Y 2
44X1910 44X1907 5482 QLogic 8Gb Intelligent Pass-thru Module for IBM BladeCenter7 - 3,4 Y 2
44X1908 - 5478 Qlogic 20-port 8Gb SAN Switch Module for IBM BladeCenter - 3,4 Y 2
44X1968 - 5075 IBM 8Gb SFP + SW Optical Transceiver - - - -
- 88Y6410 - QLogic 4/8 Gb Intelligent Pass-thru Module for IBM BladeCenter - 3,4 Y 2
- 88Y6406 - QLogic 20-port 4/8 Gb SAN Switch Module for IBM BladeCenter - 3,4 Y 2
- 44X1905 - QLogic 20-port 8Gb SAN Switch Module for IBM BladeCenter - - - -
- 43W6724 - QLogic 10-port 4Gb SAN Switch Module for IBM BladeCenter - 3,4 Y 2
- 43W6723 - QLogic 4Gb Intelligent Pass-thru Module for IBM BladeCenter - 3,4 Y 2
- 39Y9324 - Server Connectivity Module for IBM BladeCenter - 1,3,4 Y 3
- 39Y9320 - IBM BladeCenter Copper Pass-thru Module - 1,3,4 Y 3
- 39Y9316 - IBM BladeCenter Optical Pass-thru Module - 1,3,4 Y 3
- 39Y9284 - CS 4Gb 10 port Fibre Channel Switch Module for IBM BladeCenter - 3,4 Y 2
- 39Y9195 - IBM BladeCenter SAS Connectivity Module - 3,4 Y 2
- 32R1861 - IBM BladeCenter Layer 2/3 Fiber Gb Ethernet Switch Module - 1,3,4 Y 3
- 32R1860 - IBM BladeCenter Layer 2/3 Copper Gb Ethernet Switch Module - 1,3,4 Y 3
- 32R1813 - Brocade 10-port 4Gb SAN Switch Module for IBM BladeCenter - 3,4 Y 2
- 32R1783 - Nortel 10Gb Uplink Ethernet Switch Module for IBM BladeCenter - 1,3,4 Y 3
- 32R1783 - Nortel 10Gb Uplink Ethernet Switch Module for IBM BladeCenter - - - -
Systems Management
- 2019B2X - IBM BladeCenter Open Fabric Manager for BC-S - - - -
Other I/O
44W4409 - 4942 10GbE 850 nm Fiber SFP+ Transceiver (SR) for IBM BladeCenter - - - -
- 43W3583 - IBM BladeCenter S Serial Pass-thru Module - - - -
- 39R6475 - 4-Gbps SW SFP Transceiver - - - -
- 32R1878 - 10GbE 1310 nm Fiber XFP Transceiver (LR) for IBM BladeCenter - - - -
- 32R1877 - 10GbE 850 nm Fiber XFP Transceiver (SR) for IBM BladeCenter - - - -
- 25K8373 - IBM eServer BladeCenter PCI I/O Expansion Unit II - - - -

Notes:

  1. If you are using the internal storage in the chassis with IBM BladeCenter S 6-Disk Storage Module you are required to have one SAS Connectivity Module for IBM BladeCenter (P/N 39Y9195) in Switch Module 3. Support for two is available for redundancy via Switch Module 4. If using the SAS Connectivity Module in Switch Module 3 you must have the same Switch Module in Switch Module 4.
  2. The mixing of fabric switches is not allowed in bays 3 and 4.
  3. Only supported in dual controller mode; a minimum quantity of two (2) required in BladeCenter S.
  4. Supported with SAS Expansion Card (CFFv) for IBM BladeCenter (39Y9190).
  5. Not compatible with Optical Pass-thru Module (Option 39Y9316) or Copper Pass-thru Module (Option 39Y9320).
  6. The connectivity module is exclusively supported by the advanced management module. Before you configure the connectivity module, make sure the advanced management modules in your BladeCenter unit are correctly configured. For more information about the advanced management module, see the User's Guide for your advanced management module and at http://www.ibm.com/systems/support/
  7. The direct connection to SAN devices is not supported. This option requires an NPIV aware external switch to operate correctly.

Figure 1. BladeCenter S (8886) I/O modules

Figure  1. BladeCenter S (8886) I/O modules

Click image to enlarge

BladeCenter S (8886) I/O modules

Figure  1. BladeCenter S (8886) I/O modules



16 December 2014