Skip to main content


COG home  > What's new  > Withdrawn information  > Submit errors or feedback

BladeCenter PN41 (3020)


Attention
Attention:
A four-digit feature code is used to specify a component that is configurable in the IBM configurators, the eBusiness Configurator (eConfig) and the IBM Web-based Hardware Configurator, used in US and Canada. Options that do not have feature codes cannot be integrated by IBM into a system using these IBM configurators. To purchase options separately, refer to the option part number provided in this document.

At-A-Glance Options

Table 1. BladeCenter PN41 (3020) at-a-glance
Part
number1		 CPU/FSB speed
(GHz/MHz) - cache4		 Number of
processors
(std/max)		 Memory
(std/max)		 System
Management
Processor
(Std/Max)		 Integrated
ethernet
3020-1RX2, 3 Intel® NPX1805 Network Processor - - - Quad 10Gb

Table 1. BladeCenter PN41 (3020) at-a-glance (continued)
Part
number1		 Storage
controller		 Internal
HDD interface		 Internal HDD
storage (Std/Max)5		 HDD bays
(Std/Max)		 Expansion
slots
(Std/Max)
3020-1RX2, 3 - - - - -
Notes:
  1. Model numbers provided are available worldwide.
  2. The IBM BladeCenter PN41 DPI blade has 2 external ports
    (1 1Gb and 1 10Gb) and 8 internal ports (4 1Gb and 4 10Gb).
  3. An additional administration host blade server is necessary to
    interface with the DPI blade, because the DPI blade does
    not have a direct user interface. The additional administration
    blade server (an IBM BladeCenter HS21 Intel blade) must
    support VMware ESX Server 3.0 or later and have dual 1
    Gbps controllers.
  4. IBM BladeCenter PN41 DPI blade contains a network
    processor for use in handling packets. This is a dedicated
    processor and is not available for general applications.
  5. The IBM BladeCenter PN41 DPI blade contains no drives
    or flash drives




Figure 1. BladeCenter PN41 DPI Processor


Click image to enlarge


Figure 1. BladeCenter PN41 external ports


Click image to enlarge

November 17, 2009