Skip to main content
Skip to main content



BladeCenter HX5 (7873)

Attention:
A four-digit feature code is used to specify a component that is configurable in the IBM configurators, the eBusiness Configurator (eConfig) and the IBM Web-based Hardware Configurator, used in US and Canada. Options that do not have feature codes cannot be integrated by IBM into a system using these IBM configurators. To purchase options separately, refer to the option part number provided in this document.

Tab navigation

Tab navigation

 
SBB number Option number1 Feature code Memory description
 
      Memory DIMMs
49Y1527 46C0599 2422 16GB (1x16GB, 2Rx4, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz VLP RDIMM
46C0548 46C0560 A0WX 2GB (1x2GB, 1Rx8, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz VLP RDIMM
46C0552 46C0564 A0WZ 4GB (1x4GB, 2Rx8, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz VLP RDIMM
46C0558 46C0570 A17Q 8GB (1x8GB, 4Rx8, 1.35V) PC3L-8500 CL7 ECC DDR3 1066MHz VLP RDIMM
49Y1550 - A100 4GB (1x4GB, 2Rx8, 1.5V) PC3-10600 CL9 ECC DDR3 1333MHz VLP RDIMM
49Y1551 - A101 8GB (1x8GB, 4Rx8, 1.5V) PC3-8500 CL7 ECC DDR3 1066MHz VLP RDIMM
90Y3220 90Y3221 A2QP 16GB (1x16GB, 4Rx4, 1.35V) PC3L-8500 CL7 ECC DDR3 1066MHz VLP RDIMM
00D5007 00D5008 A3KN 32GB (1x32GB, 4Rx4, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz VLP RDIMM

Notes:

  1. Installed DIMM pairs can be of different sizes, but they must be of the same speed.
  2. HX5 supports memory mirroring and memory sparing.
  3. IBM MAX5 for BladeCenter (SBB 46M6972 / FC 1740) and IBM MAX5 V2 for BladeCenter(SBB 88Y6127 / FC A16N)only supports memory mirroring; memory sparing is not supported
  4. Memory must be fully populated in the HX5 base blade before populating the MAX5 for BladeCenter (SBB 46M6972 / FC 1740)and IBM MAX5 V2 for BladeCenter(SBB 88Y6127 / FC A16N).
  5. SBB 49Y1550 / FC A100 and SBB 49Y1551 / FC A101 are only supported in the IBM MAX5 for BladeCenter (SBB 46M6972 / FC 1740)


Figure 1. BladeCenter HX5 (7873) IBM MAX5 Memory Expansion

Figure 1. BladeCenter HX5 (7873) IBM MAX5 Memory Expansion
Click image to enlarge



Table 1. Standard Memory Configuration
Model Std. DIMM Configuration
A1Y, A2Y, A3Y, B1Y, B2Y, C1Y, D1Y, F1Y, F2Y, F3Y 4GB (1x4GB, 2Rx8, 1.35V) PC3L-10600 CL9 ECC DDR3 1333MHz VLP RDIMM
E1Y, E2Y, G2Y, G3Y 8GB 4R x 8, 2Gbit DDR-3 1333MHz VLP RDIMM


         May 14, 2013