Skip to main content

TS3200 Tape Library Express Model

Tab Selection

Highlights

The TS3200 Express Model and its storage management applications are designed to address capacity, performance, data protection, reliability, affordability and application requirements. It is designed as a functionally rich, high-capacity, entry-level tape-storage solution incorporating LTO Ultrium tape technology. The IBM TS3200 Express model is an excellent solution for large-capacity or high-performance tape backup with or without random access. The TS3200 is also an excellent choice for tape automation for IBM Power Systems, IBM System x and other open systems.

The IBM TS3200 Tape Library Express is well-suited for handling the backup, restore and archive data-storage needs for small to medium-size environments. With the use of up to two LTO full-height tape drives or up to four LTO half-height tape drives and 48 tape cartridge capacity, the IBM TS3200 model is designed to use LTO technology to cost-effectively handle growing storage requirements. The TS3200 Tape Library is configured with four removable cartridge magazines, two on the left side (24 data cartridge slots) and two on the right (24 data cartridge slots). Additionally, the lower left magazine includes a three-slot input/output (I/O) station to help support continuous library operation while importing and exporting media. A bar-code reader is standard in the library, supporting the library’s operation in sequential or random access mode. The TS3200 also comes standard with remote management capabilities to allow for remote administration of the tape library through a web interface. Path Failover, an optional feature, is designed to provide automatic control path failover to a preconfigured redundant control path in the event that a host adapter or control path drive is lost without aborting the current job in process.

The IBM Ultrium 5 technology is designed to provide greater capacity with continued support for encryption of data. The hardware encryption and decryption core and control core resides in the IBM Ultrium 5 tape drive (available to the TS3200 with the 6 Gigabits per second (Gbps) Serial Attached SCSI (SAS) and 8 Gbps Fibre Channel (FC) interface). A larger internal data buffer in the full-height drive helps improve data access rates and reduce cartridge fill and rewind times along with dynamic channel calibration to help increase data throughput. In addition to reading and writing to LTO 5 tape cartridges, the LTO 5 tape drive can read and write to LTO 4 cartridges and read LTO 3 cartridges with improved data rates. The IBM Ultrium 5 tape drive is designed to support up to 140 MegaBytes per second (MBps) native data-transfer rates and up to 1.5 TB native physical capacity when using the IBM System Storage Ultrium 1.5 TB Data Cartridge (3.0 TB with 2:1 compression). The TS3200, featuring Ultrium 5 tape drives, has a capacity of up to 72 TB native (144 TB with 2:1 compression).

The IBM LTO 4 tape drives are designed to support up to 120 MBps native data-transfer rates. In addition, the TS3200, featuring Ultrium 4 tape drives, has a capacity of up to 38.4 TB (76.8 TB with a 2:1 compression).

The IBM TS3200 Tape Library Express featuring full-height and half-height technology offers an 8 Gbps FC and 6 Gbps SAS interfaces for Ultrium 5, Ultrium 4 and Ultrium 3 (HH SAS only) and it can be attached to a wide variety of open-system servers. The sequential or random access library comes in a stand-alone or optional rack-mountable configuration. The IBM TS3200 also has an Liquid Crystal Display (LCD) and indicators for power, drive and activity, error status and message information.

IBM System Storage TS3200 Tape Library Express Model


Common features

Hardware summary


Feature Benefits
IBM LTO Ultrium 5, 4 and 3 Tape Drive
Sequential or random access mode with a standard barcode reader
4U form factor with 48 data cartridge slots
Remote library management through a web interface
Ultrium 5 native data capacities up to 72 TB (144 with 2:1 compression)

Ultrium 4 native data capacities up to 38.4 TB (76.4 with 2:1 compression)

Ultrium 3 native data physical capacities up to 19.2 TB (up to 38.4 TB using 2:1 compression)
Ultrium 5 native data rate of 140 MBps

Ultrium 4 native data rate of 120 MBps

Ultrium 3 native data rate of 80 MBps

IBM System Storage TS3200 Tape Library Express
Drive options Ultrium 5 Full Height: 6 Gbps SAS (FC # 8245 or 46X2683); 8 Gbps FC (FC # 8244 or 46X2682)

Ultrium 5 Half Height: 6 Gbps SAS (FC # 8247 or 46X2685); 8 Gbps FC (FC # 8248 or 46X2684)

Ultrium 4 Full Height: Low Voltage Differential (LVD) SCSI (FC # 8143 or 95P5002), 3 Gbps SAS (FC # 8145 or 95P5006); 4 Gbps FC (8144 or 95P5004)

Ultrium 4 Half Height: 6 Gbps SAS (FC # 8149 or 46X7117), 8 Gbps FC (FC # 8148 or 46X6912)

Ultrium 3 Half Height: 6 Gbps SAS (FC # 8049 or 46X7122)
Available models: TS3200 Tape Library Model L4U Driveless

3573 L4U (MTM)

35734UL (HVEC)
Optional feature codes
Path Failover 45E9503 or FC # 1682
Transparent LTO Encryption 45E3081 or FC # 5900
Rack mount 23R6998 or FC # 7002
Right-side magazine set

Left-side magazine, upper

Left-side magazine, lower
23R6999 or FC # 8106

45E2225 or FC # 8107

45E2231 or FC # 8108
Ultrium Tape Cartridges Ultrium 5 media: 46C2084 or FC # 8505/Ultrium 4 media: 95P4278 or FC # 8405/Ultrium 3 media: 95P2020 or FC # 8305
Ultrium Cleaning Cartridge 23R7008 or FC # 8002
Additional Power Supply 23R7263 or FC # 1901
Tape drive type IBM LTO 5 Full Height and Half Height; IBM LTO 4 Full Height and Half Height; IBM LTO 3 Half Height
Number of drives 1-4
Number of tape cartridges 48
Number of mail slots 3
Physical capacity Up to 3.0 TB per cartridge compressed; 1.5 TB native with LTO 5

Up to 1.6 TB per cartridge compressed; 800 GB native with LTO 4

Up to 800 GB per cartridge compressed; 400 GB native with LTO 3

Up to 144 TB per tape library compressed; 72 TB native with LTO Ultrium 5

Up to 76.8 TB per tape library compressed; 38.4 TB native with LTO Ultrium 4

Up to 38.4 TB per tape Library compressed; 19.2 TB native with LTO Ultrium 3
Data transfer rate (per drive) Up to 140 MBps native with LTO 5

Up to 120 MBps native with LTO 4 

Up to 80 MBps native with LTO 3
Dimensions (W x H x D)
Stand-alone 17.6 in (447.5 mm) x 7.29 in (185.2 mm) x 31.9 in (810 mm)
Rack-mount 17.6 in (447.5 mm) x 6.89 in (175.2 mm) x 29.13 in (740 mm)
Weight 47 lb (21.3 kg) without rack mount
Operating environment
Temperature 50 to 113 degrees F, 10 to 45 degrees C
Relative humidity 10 percent RH to 80 percent RH (non-condensing)
Electrical power 4.0 amps at 100 V ac, 2.0 amps at 240 V ac 0.1 KVA
Attachment support 8 Gbps FC and 6 Gbps interface, LVD SCSI, 4 Gbps FC and 3 Gbps SAS interfaces (LTO-4 FH)
Operating systems support Native device-driver support is available for selected IBM System servers and other Linux and Windows open system servers.

Latest support information: ibm.com/systems/support/storage/config/ssic (US)
Warranty Three-year, Customer Replaceable Unit (CRU) service in most countries

** Price does not include required features, tax or shipping and is subject to change without notice. Reseller prices may vary. IBM does not warrant non-IBM products. All offers subject to availability. IBM reserves the right to alter product offerings and specifications at any time without notice. IBM is not responsible for photographic or typographic errors.

We're here to help

Easy ways to get the answers you need.


Call me
0870 539 0390
Priority code:
101J413W

Case Studies