|
|
| |
 System i Access
| | |
|
|
|
Table of Contents:
|
|
Known problem with Operations Console and Windows NT and Microsoft security update:
If you use Windows NT with Operations Console with either of the following configurations:
- local console directly attached to the system
- local console directly attached with remote access allowed
then the installation of Microsoft security update Q823803 may prevent future connections and the creation or change of existing configurations. Microsoft has a hot fix available, hotfix KB823803, that may be installed to correct this issue. Contact Microsoft directly to obtain this hotfix. Refer to
the Microsoft web site for details.
Known problem with Operations Console and Windows 2000 Service Pack 4:
A problem with Operations Console when using Service Pack 4 for Microsoft Windows 2000 is documented in APAR
SE11182. Microsoft resolved this problem with a hotfix. It is documented in Microsoft knowledge base article
824301. Contact Microsoft to obtain this fix.
|
 Back to top
|
- Hardware Management Console (HMC) Links:
HMC in the System i and i5/OS Information Center
Support for HMC for POWER5 and POWER4 Processors
-
Users of Operations Console and the IBM eServer i5 550
The use of the
2.0 GHz Pentium M Integrated xSeries Server (type-model 4812-001, feature codes 4812 and 4813), announced October 2004, will prevent LAN Operations Console from working on a single-tower i5/OS system. The Integrated xSeries Server takes up two card slots and requires the async adapter used for Operations Console to be moved to a new location. Also, LAN Operations Console and twinaxial consoles are not supported in this environment. This does not affect a system with multiple towers or a system using an HMC, where individual adapters can be tagged for specific functions.
|
| eServer i5 Model |
ECS/Async location |
LAN adapter location |
| 550 |
C02 (1) |
C04 (2) |
Notes:
(1) If the 2.0 GHz Pentium M Integrated xSeries Server card is installed, then use C05
(2) If the 2.0 GHz Pentium M Integrated xSeries Server card is installed, then a LAN or twinax adapter card
cannot be used
- Operations Console and Windows XP Professional:
Operations Console is a component of iSeries Access for Windows. Operations Console is supported on Windows XP Professional with V5R2M0 and later iSeries Access for Windows. V5R3M0 iSeries Access for Windows can be used to connect to systems with V5R1, V5R2, and V5R3 i5/OS.
-
Back to top
|
|
| |
|
|
|
