| Ultra-fast 1333 MHz, 18 fully buffered 8 GB DDR-3 DIMM memory with up to 288 GB of memory |
- Highly scalable memory for compute-intensive applications and virtualized environments.
- Fits up to 50% more VMs per blade than prior generation blade servers.
- Ability to run two DIMMs per memory channel at 1333 MHz.
- Choose between 1.5 V memory or energy-efficient 1.35 V memory.
- 1.5 V memory operates at 17% lower power than the previous generation memory’s thermal design.
- Save up to an additional 10% on your memory power budget with low-voltage 1.35 V memory
- Ability to transfer I/O data at eight times the speed of the memory cell it contains, enabling faster bus speeds and higher peak throughput than previous generation memory.
- Interleaved memory to improve application performance.
|
| High performance, energy-smart Intel® Xeon® 5500 or 5600 series processors |
- Improved productivity through higher processing performance
- Significant gains over prior generation quad- and dual-core processors
- Multithreaded applications for faster concurrent execution
- Large cache size for more transaction processing
|
| Support for two 1.8" solid-state drives (SSD) |
- Faster and more reliable performance with less overall power requirements than traditional spinning hard disk drives
|
| Optional embedded hypervisor |
- Embedded hypervisor technology to simplify adoption and deployment of industry-leading third-party virtualization solutions
- New, system-friendly thin hypervisor architecture can help optimize virtualization performance
- Integrated into server hardware to help provide compatible, pretested and optimized hardware configurations
|
| 1 standard CIOv and 1 high-speed CFFh expansion slot |
- Expandability choices and the opportunity to increase I/O bandwidth for performance and productivity
|
| Virtual Fabric for IBM BladeCenter |
- Multiple virtual ports and protocols (Ethernet, FCoE and iSCSI) from a single physical port while allowing shared bandwidth across multiple applications
- True line-rate 10 Gb performance
- Each virtual port operates anywhere between 100 Mb and 10 Gb and can run as Ethernet, FCoE or iSCSI
|
| RAID-0, -1 and -1E (optional RAID-5 with battery-backed cache) |
- Enhanced system availability and data protection by supporting solid-state drives with advanced RAID capabilities
|
| High-speed I/O |
- Support for up to four 10 Gigabit Ethernet or 8 ports of virtual I/O to each blade via Virtual Fabric from IBM BladeCenter
|
| Support for all BladeCenter enterprise and office chassis |
- Support for all BladeCenter chassis, including the BladeCenter E, one of the industry’s most dense and energy-efficient chassis
|
| IBM Integrated Management Module (IMM) |
- Around-the-clock remote management capabilities
- Increased server availability through continuous system monitoring and notification of potential system failures or changes
- Concurrent keyboard, video and mouse (cKVM) standard for flexible blade access without requiring an expansion slot
|
| Light path diagnostics |
- Provides information on failing components without interrupting system operations
- Provides a lighted path to failing components inside the system
- Speeds hardware repairs to reduce service time
|
| Predictive Failure Analysis |
- Detects when components or hard drives are operating outside of set thresholds or are approaching historical failure thresholds
- Helps you increase uptime by enabling you to receive proactive alerts in advance of failure
|
| Unified Extensible Firmware Interface (UEFI) |
- Next-generation BIOS with improved interface for more efficient boot of operating systems
- 64-bit architecture that can address 16 TB of memory
- Improved setup, configuration and updates, and simplified error handling
|
| Open Fabric Manager |
- Works with chassis to preassign network and storage addresses in the chassis before installation
- Automatically moves network addresses from failed blades to available capacity
- Supported by all daughter cards
|
| Trusted Platform Module 1.2 |
- Enables advanced cryptographic functionality such as digital signatures and remote attestation
- Provides keys for signing and data decryption
- Does not expose private keys outside of the Trusted Platform Module
|
| IBM Systems Director Active Energy Manager™ |
- Advanced power notification, control and monitoring to help achieve lower heat output and cooling costs
|
| xSmart Energy Control |
- Use p-state capping to limit the amount of power a system can draw to assist in power planning in the data center
|
| IBM Systems Director |
- Comprehensive systems management tools
- Helps increase uptime, reduce costs and improve productivity through advanced server management capabilities
|
| IBM ServerGuide |
- Simplifies installation and configuration of your HS22V blade
|
| 3-year customer replacement unit and on-site limited warranty |
- Provides peace of mind for an extended period of time
|
