Skip to main content

Techdocs Library > Flashes >

IBM PowerHA SystemMirror v7.1.2 Enterprise Edition Adds Support for the EMC® Symmetrix® VMAX®



Document Author:

Michael E Herrera


Document ID:

FLASH10822


Doc. Organization:

Advanced Technical Sales


Document Revised:

08/02/2016


Product(s) covered:

PowerHA SystemMirror







Abstract: VMAXe SRDF support is available for PowerHA Version 7.1.3 as of July 30, 2015

IBM PowerHA SystemMirror v7.1.2 Enterprise Edition Adds Support for the EMC® Symmetrix® VMAX®
(update for VMAXe below0
July 29, 2016

IBM PowerHA SystemMirror for AIX* V7.1.2 for AIX V6.1 and V7.1 Enterprise Edition adds support for the EMC Symmetrix VMAX.

PowerHA SystemMirror V7.1 Enterprise Edition now supports High Availability and Disaster Recovery (HA/DR) capability with EMC Symmetrix Remote Data Facility (SRDF) replication with the EMC Symmetrix VMAX. Support is for both Synchronous and Asynchronous SRDF mirror capabilities.

Please refer to the following information for support details.


Symmetrix VMAX
AIX V6.1
AIX V7.1
AIX V7.2
PowerHA V7.1.2 Enterprise Edition
PowerHA V7.1.2 SP 3
AIX 6.1 TL8 SP 3
AIX APARs IV43497, IV43498
PowerHA V7.1.2 SP 3
AIX V7.1 TL2 SP 3
AIX APARs IV37880, IV41728
PowerHA V7.2.0 Enterprise Edition
AIX 6.1 TL9 SP6
AIX V7.1 TL3 SP6
AIX V7.1 TL4 SP2
AIX V7.2 SP2


Addition EMC/SRDF Software Requirements:
  • EMC SYMCLI - SYMCLI.SYMCLI.rte 7.5.1.9 (The SYMCLI command line interfaces must be installed in the default location, /usr/symcli/bin)
  • EMC Storage Subsystem:
  • DMX-3 with microcode 5773.184.130 or higher
  • DMX-4 with microcode 5773.184.130 or higher
  • VMAX with microcode 5875 or higher
  • PowerPath 5.5.0.6
  • Customers running EMC Solutions Enabler 7.60 should install SE Hotfix 7.5.1.9. Please see EMC Primus Case emc321039 for details.

Service can be obtained from the IBM Electronic Fix Distribution site at:

http://www.ibm.com/support/fixcentral/

Updates: July 30 2015
PowerHA SystemMirror 7.1.3 Enterprise Edition now also supports EMC Symmetrix VMAXe storage subsystems. Following software are needed for such support:

  • PowerHA SystemMirror: 7.1.3 SP3
  • AIX 6.1 TL09 SP5 or AIX 7.1 TL03 SP5
  • Solutions Enabler 8.0.3
  • PowerPath 6.0
  • Enginuity: 5876.268.174

Updates: July 29, 2016

PowerHA V7.2 appended to the table with supported levels

For questions or concerns, please send a note to HA Feedback at:

HA Solutions Feedback/Poughkeepsie/IBM or hafeedbk@us.ibm.com

* Trademark or registered trademark of International Business Machines Corporation.
Other company, product, and service names may be trademarks or service marks
of others.




Classification:

Hardware

Category:

Installation and Migration




Platform(s):

IBM Power Systems



O/S:

AIX

Keywords:

powerha, hacmp, srdf, emc, vmax

The Techdocs Library
Is this your first visit to Techdocs (the Technical Sales Library)?

Learn more


Techdocs QuickSearch

: