Techdocs Library > Flashes > IBM PowerHA SystemMirror Supports the IBM POWER 7 770/780

Document Author:	Shawn Bodily		Document ID:	FLASH10708
Doc. Organization:	Advanced Technical Sales		Document Revised:	10/27/2010
Product(s) covered:	HACMP; HACMP/ES

Abstract: IBM PowerHA SystemMirror for AIX* (formerly HACMP*)v5.4., V5.5 and 6.1 for AIX adds support for the IBM POWER7 770/780 (9117-MMB/9179-MHB).

IBM PowerHA SystemMirror Supports the IBM POWER 7 770/780 (9117-MMB/9179-MHB) March 19, 2010 Updated to include 5.4.1 and 7.1 support IBM PowerHA SystemMirror for AIX* (formerly HACMP*) V5.5 and 6.1 for AIX V6.1 adds support for the IBM POWER7 770/780 (9117-MMB/9179-MHB). Please refer to the following information for support details. IBM POWER™ 7 770/780 (9117-MMB/9179-MHB) AIX 5.3 AIX 6.1 AIX 7.1 PowerHA V5.4.1 AIX V5.3, TL11, SP01 RSCT 2.4.13.0 AIX V6.1, TL04, SP02 RSCT 2.5.4.2 PowerHA 5.4.1 SP10 AIX V7.1, RSCT 3.1.0.0 PowerHA V5.5 AIX V5.3, TL11, SP01 RSCT 2.4.13.0 AIX V6.1, TL04, SP03 RSCT 2.5.5.0 PowerHA 5.5 SP5 AIX V7.1, RSCT 3.1.0.0 PowerHA V6.1 AIX V5.3 TL11, SP01 RSCT 2.4.13.0 AIX V6.1, TL04, SP03 RSCT 2.5.5.0 PowerHA 6.1 SP3 AIX V7.1, RSCT 3.1.0.0 PowerHA V7.1 N/A AIX V6.1, TL6 RSCT 3.1.0.0 AIX V7.1, RSCT 3.1.0.0 Notes Built-in serial ports in Power 7 servers are not available for PowerHA use. It is suggested to use disk heart beating instead. Built-in Ethernet adapters are supported for PowerHA use. IBM strongly recommends the application of APAR IZ72927 on PowerHA 6.1 clusters that use both DLPAR and sub-processor partitions.

Classification:	Hardware; Software	Category:	Installation and Migration
Platform(s):	IBM System p Family
O/S:	AIX	Keywords:	powerha, hacmp, systemmirror, p7, 770, 780