APAR
Date |
PTF |
Contents |
PK92982
2009/08/12 |
UK49062-91C |
FSU STAGE 2, JOB DTRFSUCL FAILS IN CASE AN ESM IS USED.
Job DTRFSUCL gets a return code 16 in case an ESM is used instead of BSM. Conditional JCL should handle this. |
PK87494
2009/07/31 |
UK48881-91C |
ABEND ATNI AND IN CASE THE TCTE INDICATES A SESSION ERROR, OLPD SHOULD NOT BE DRIVEN
After an abend ATNI as well as in case TCTEASE and TCTEUFRI are set, OLPD user screen should not be displayed since the terminal is not available. Do not handle ATCV abends and ATND. In case of a session error (TCTEINT or TCTEASE) do not continue with OLPD. |
PK86692
2009/05/25 |
UK46802-91C |
WRONG CREATION DATE SHOWN IN VSAM DIALOG.
The panel IESFILDETD on vse/iui shows wrong century in four digits for the year of CREATION DATE, such as 2086261 appeared. Since his problem VSAM file was actually created on 1986 (not on 2086) the CREATION DATE should be shown as 1986261. |
PK85480
2009/04/05 |
UK46116-91C |
DEFAULT LIMIT FOR SORTED POWER ENTRIES BY TIME IS SET TO 16. THIS IS TOO LOW.
The default of 16 entries is too low. Default value should be increased to 999. |
PK78884
2009/01/23 |
UK43313-91C |
AICA ABEND FOR IESZATDX LOOP AFTER ITEMERR CONDITION
Loop after an ITEMERR condition after PUTQ request for queue IEZATDNM. The loop ends in an AICA abend. |
PK75152
2008/11/02 |
UK41474-91C |
HARDWAIT FFF STARTING A DYNAMIC PARTITION WITH SAMPLE JOB ACCOUNTING SKJOBACC ACTIVE
Hardwait FFF due to an overlay in the GETVIS control area. Hardwait occurs with job accounting routine SKJOBACC active, starting a dynamic partition. |
PK73367
2008/10/06 |
UK40515-91C |
VSAM BACKUP/RESTORE DIALOG USING SNAP (FASTPATH 3719) GENERATES INVALID JOB
- Job generates an IDCAMS control statement
IMPORT CONNECT OBJECTS(( -
COP -
VOLUMES(TARGET) DEVT(FBA-))) -
CATALOG(VSAM.MASTER.CATALOG)
FBA- is invalid.
- DMPMGR procedure does not erase all dumps if more than 50 dumps exist.
|
PK69759
2008/07/31 |
UK38493-91C |
DOWNLEVEL CHECK WHEN INSTALLING DB2 CLIENT EDITION
Installing DB2 Client Edition on a serviced level like the version that comes with z/VSE 4.1.2, a downlevel check is issued with following APARs and PTFs
PK60248 UK33960
PK61334 UK34588
PK57531 UK34925
PK59102 UK34925
PK55304 UK33736
This is due to a COMPATIBLE WITH statement generated in the install job. |
PK69519
2008/07/25 |
UK36287-91C |
AUDIT LEVEL IN DIALOG IESADMSLE CANNOT BE CHANGED FROM ANYTHING TO 1
The dialog allows to change the audit for a transaction profile from 1 to blank, 2 or 3, but changing back to 1 results in message: AUDIT MUST BE 1, 2, 3 OR BLANK. |
PK69036
2008/07/25 |
UK36286-91E |
CHANGING AUDIT TO 1 FOR TRANSACTION PROFILE ON IUI DIALOG FP2811 GETS MSG1114 WITH NO EXPLANATORY.
On IUI dialog fp-2811 (iesadmbsle - maintain security profiles: resource class tcicstrn), changing an audit to 1 on transaction profile gets an error msg1114, "IESBSTL message 1114 from offset x'0BFA',(key JAMIESJ1114) not in IESTRFL", with no explanatory. The audit to 2 and 3 can be changed on iui fp-2811. A batch job on exec BSTADMIN with CH AUDIT(FAI) can change the audit to 1. |
PK66632
2008/05/08 |
UK36731-91C |
INCORRECT BACKUP JOB GENERATED FOR LABELED TAPE
IUI generated backup job for a library to a labeled tape fails because TAPELABEL parameter is not generated. |
PK64822
2007/04/24 |
UK35743-91E |
ADDING NON ADMINISTRATOR USER ON IUI DIALOG FP 211 GETS MSG1059, THEN THE USER CAN NOT LOGIN DUE TO NO AUTHORIZATION
On IUI dialog fp-211 (iesadmupl2), a new programmer user with type=2 can be added, but gets the error msg - 'IESXUPM message 1059 from offset x'051C',(key JAMIESJ1059) not in IESTRFL'. Then, login with the new profile user can not be allowed due to no authorization to use this application. And there is no explanation for the error msg1059. |
PK64001
2007/04/09 |
UK35317-91C |
BOOTSTRAP RECORDS NEED TO BE RE-WRITTEN AFTER DY46863
- Bootstrap records need to be re-written including IJBLDIPL phase. PTF application dialog needs to be changed.
- Defragmentation of History File should also personalize the history file and reestablish the correct service refresh in the history file.
|
PK58054
2007/12/14 |
UK32229-91C |
IESZATCO DEFAULT MODEL WITH EXTENDED DATASTREAM FOR SNA TERMINAL
In case of cross domain terminals accessing CICS/VSE, the autoinstall exit IESZATCO selects a terminal without extended data stream. |
PK54868
2007/10/24 |
UK30529-91C |
MESSAGE IESA1201 IF INVALID KEY IS USED ON PANEL IESADMDA
On Japanese system, using an invalid key on panel Display System Activity will result in message IESA1201. |
PK50786
2007/08/20 |
UK28382-91C |
SUPPORT OF DB2 7.5
z/VSE 4.1 support for DB2 7.5.0
DFH$SDAP skeleton for CICS shutdown. |
PK54085
2007/10/05 |
UK29797-91C |
WRONG TERMINAL MODEL SELECTED IN CASE OF CROSS DOMAIN TERMINALS
The model type for autoinstall terminals Q........ coming from z/OS NVAS system will always be DFHLU2E2. These are SNA terminals where the wrong autoinstall model is slected. Model DFHLU2E2 does not have a user area TCTUA assigned, thus failing with ICCF. |
PK48951
2007/08/07 |
UK27859-91C |
PROCEDURE UPCNTLSP LEADS TO INCORRECT IESCNTL ENTRIES With following input:
- UPCNTLSP procedure incorrect continuation records and other problems leading to incorrect selection panel records.
- Exit DFHXSE needs to correctly handle a return code of 4 given by the DFHSK macro under CICS/VSE.
|
PK47030
2007/08/07 |
UK27873-91E |
THE NEXT SCREEN OF IUI SECURITY MAINTENANCE SCREEN(FASTPASS 281) WAS INCORRECT. WRONG POTITION AND/OR WRONG CHARACTER. IUI SECURITY MAINTENANCE SCREEN - fastpath 281 shows incorrect data, wrong position and/or wrong |
PK47285
2007/06/28 |
UK26190-91E |
AT IESADMNWU NEWS MENU BY IUI FP34 DBCS JAPANESE CHARACTERS CAN NOT BE ENTERED.
When tring to enter the dbcs Japanese characters at iesadmnwu news menu opened by iui fastpath 34, it can not be entered with an input inhibitted state. The x-mark appears at left side on bottom line on the pannel and protects the input available. |
PK44597
2007/06/14 |
UK24995-91C |
DISPLAY ACTIVE USERS SHOWS CICSUSER AS USERID.
If a user signs on to CICS using CESN and not IUI, the related user shows up as CICSUSER in the Display Active Users dialog. |
PK38656
2007/03/12 |
UK22056-91D |
MISCELLANEOUS FIXES FOR Z/VSE 4.1.0 INTERACTIVE INTERFACE.
Solved PTMs 210, 285, 287.
NLSVERUP not correct. |
PK37980
2007/03/12 |
UK22041-91C |
MISCELLANEOUS FIXES FOR Z/VSE 4.1.0 INTERACTIVE INTERFACE.
Solved PTMs 210, 285, 287.
APAR PK38542.
MXT was set to 20 which is pretty low, only 8 IUI consoles could be started in parallel.
CI size in SKVTAPE was specified for data part only, should be for the whole cluster.
Defragmentation of history file did not work due to the fact that the uncompressed history file (AUX) was copied back to the system history file.
Wrong message
RESOURCE NAME CONTAINS INVALID CHARACTERS. in dialog IESADMBSLA. |
PK37949
2007/03/12 |
UK22041-91C |
ABEND AEIP (INVREQ) IN IESCONSL.
If a PAUSE is set to a value above 59 on an IUI console and if console is put to HOLD, an AEIP abend (INVREQ) occurs. |
PK37948
2007/03/12 |
UK22041-91C |
IESCLEAN SHOULD ISSUE A MESSAGE WHEN CLEANUP PROCESSING IS DONE.
Customer got an abend AZI9 which was caused by IESCLEAN processing. When checking the CICS listing, he complained that cleanup processing does not issue any message. |
