APAR
Date |
PTF |
Contents |
PK58053
2007/12/14 |
UK32227 - 81C |
IESZATCO DEFAULT MODEL WITH EXTENDED DATASTREAM FOR SNA TERMINAL
In case of cross domain terminals accessing CICS/VSE, the autoinstall exit IESZATCO selects a terminal without extended data stream.
|
PK52736
2007/10/05 |
UK29783 - 81C |
WRONG TERMINAL MODEL SELECTED IN CASE OF CROSS DOMAIN TERMINALS
The model type for autoinstall terminals Q........ coming from z/OS NVAS system will always be DFHLU2E2. These are SNA terminals
where the wrong autoinstall model is selected. SNA terminals get model DFHLU2E2 selected in case of SNA terminals coming cross domain. |
PK43473
2007/06/14 |
UK24401 - 81E |
SUPPORT FOR 3592 TAPE HARDWARE ENCRYPTION.
Support for tape encryption and other miscellaneous enhancements.
Hardware configuration dialog will be changed, allocation and size parameters for the POWER partition in FSU stage 2 can be up to 6 digits in kilo bytes. |
PK43473
2007/06/14 |
UK24400 - 81E |
SUPPORT FOR 3592 TAPE HARDWARE ENCRYPTION.
Support for tape encryption and other miscellaneous enhancements.
Hardware configuration dialog will be changed, allocation and size parameters for the POWER partition in FSU stage 2 can be up to 6 digits in kilo bytes. |
PK43473
2007/06/14 |
UK24398 - 81D |
SUPPORT FOR 3592 TAPE HARDWARE ENCRYPTION.
Support for tape encryption and other miscellaneous enhancements.
Hardware configuration dialog will be changed, allocation and size parameters for the POWER partition in FSU stage 2 can be up to 6 digits in kilo bytes. |
PK43473
2007/06/14 |
UK24397 - 81A |
SUPPORT FOR 3592 TAPE HARDWARE ENCRYPTION.
Support for tape encryption and other miscellaneous enhancements.
Hardware configuration dialog will be changed, allocation and size parameters for the POWER partition in FSU stage 2 can be up to 6 digits in kilo bytes. |
PK43465
2007/04/26 |
UK24402 - 81C |
DISPLAY ACTIVE USERS SHOWS CICSUSER AS USERID.
If a user signs on to CICS using CESN and not IUI, the related user shows up as CICSUSER in the Display Active Users dialog. |
PK38806
2007/02/12 |
UK21988 - 81H |
STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Wrong maximum value for cylinders in help panel.
TPA tape definition - wrong description. |
PK38806
2007/02/12 |
UK21983 - 81E |
STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Wrong maximum value for cylinders in help panel.
TPA tape definition - wrong description. |
PK38806
2007/02/12 |
UK21982 - 81D |
STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Wrong maximum value for cylinders in help panel.
TPA tape definition - wrong description. |
PK38806
2007/02/12 |
UK21961 - 81A |
STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Wrong maximum value for cylinders in help panel.
TPA tape definition - wrong description. |
PK38542
2007/02/12 |
UK21960 - 81C |
STARTING MORE THAN 8 IUI CONSOLES RESULTS IN A HANG.
Due to the fact that MXT was set to 20 which is pretty low, only 8 IUI consoles could be started in parallel. The MXT value is specified as an overwrite in the startup job.
NCP dialogs rework.
CI size in SKVTAPE was specified for for data part only, should be for the whole cluster.
TPA tape selection in hardware configuration incomplete. |
PK36627
2007/01/08 |
UK21003 - 81C |
ABEND AEIP (INVREQ) IN IESCONSL.
If a PAUSE is set to a value above 59 on an IUI console and if console is put to HOLD, an AEIP abend (INVREQ) occurs. The abend occurs because the timer transaction IECT is started with the specified value of PAUSE as INTERVAL. The syntax for INTERVAL is however hhmmss, so 60 seconds have to be entered as 100. |
PK35764
2006/12/12 |
UK20356 - 81C |
IESCLEAN SHOULD ISSUE A MESSAGE WHEN CLEANUP PROCESSING IS DONE.
Customer got an abend AZI9 which was caused by IESCLEAN processing. When checking the CICS listing, he complained that cleanup processing does not issue any message. |
PK35149
2006/12/05 |
UK20162 - 81A |
DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions. |
PK35149
2006/12/05 |
UK20163 - 81D |
DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions. |
PK35149
2006/12/05 |
UK20164 - 81E |
DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions. |
PK35149
2006/12/05 |
UK20165 - 81H |
DISPLAY SYSTEM ACTIVITY DIALOG SHOULD SHOW CURRENT ACTIVE TRANSACTIONS.
The display system activity dialog shows Peak Active user transactions, this value is not as meaningful as the current active number of user transactions. |
PK30358
2006/11/28 |
UK20021 - 81E |
AT IESADMNWU NEWS MENU BY IUI FP34 DBCS JAPANESE CHARACTERS CAN NOT BE ENTERED.
When tring to enter the dbcs Japanese characters at iesadmnwu news menu opened by iui fastpath 34, it can not be entered with an input inhibitted state. The x-mark appears at left side on bottom line on the pannel and protects the input available. |
PK34613
2006/11/15 |
UK19659 - 81C |
DEFAULT MODEL FOR NON SNA TERMINALS RESET BY CICS TO A DFHLU0M2.
Customer got message K761I INSUFFICIENT TCTUA SIZE FOR TRMID=L100 this is due to the fact that for a local non SNA terminal model DFHLU0M2 was selected instead of any VSE model with a userarealength of 255. The default type for non SNA terminals should be VSE23782. |
PK33776
2006/11/15 |
UK19662 - 81C |
SECURITY SETUP FOR REPORT CONTROL FEATURE IS INCOMPLETE.
The security definitions for the RCF facilities are correct in skeleton SKRCFSEC, however, GROUP1 should get PERMITS to access.
SKRCFSEC needs to run in order to allow access to RCF printers and reports. With CICS APAR PK11491 installed, a security check will be made (with z/VSE 3.1.1 or later) on all RCF operations like CEOS, CEMS or also EXEC CICS SPOOLOPEN.
This is regardless if the new security concept is used or not. The check will fail unless the RCF facilities are not defined and the related users/groups have access. This is done with skeleton SKRCFSEC. |
PK32566
2006/10/09 |
UK18593 - 81C |
VTAM STARTUP JOB SHOULD REFLECT PRD2.SCEEBASE AND PRD2.PROD IN LIBDEF SETUP.
Customer had added additional steps for DMF reporting and printing CICS statistics to the VTAM startup job. This requires PRD2.SCEEBASE and PRD2.PROD (for DFSORT) in the search chain.
Include PRD2.PROD in search chain and change to temporary LIBDEFS. |
PK30895
2006/09/06 |
UK17740 - 81A |
TRANSLATION ERRORS IN GERMAN SYSTEM
Several explain panels are truncated. |
PK28294
2006/08/01 |
UK16727 - 81C |
ILLEGAL STARTING POSITION SETTING ON REDISPLAY OPERATION GETS ABEND ASRA.
ERRONEOUSLY TYPING -M OR -H AND PRESSING PF7(BWD) TO SKIP ALL logging items of the last minutes or hours and to continue paging backward causes abend asra. In other words, iui fp-31 console redisplay operation gets msgdfhap0001 if there is no number following -(minus) sign.
F2 0103 DFHAP0001 DBDCCICS AN ABEND (CODE 0C7/AKEA) HAS OCCURRED AT OFFSET X'0001A498' IN MODULE IESCONSL
F2 0103 DFHME0116 DBDCCICS (MODULE:DFHMEME) CICS SYMPTOM STRING FOR MESSAGE DFHAP000 IS PIDS/564805400 LVLS/411 MS/DFHAP0001 RIDS/DFHSRP PTFS/VSE411 AB/S00C7 AB/UAKEA RIDS/IESCONSL ADRS/0001A498.
This APAR is related to DY46554. |
PK23632
2006/07/21 |
UK16411 - 81C |
MESSAGE IESA1202 RECEIVED ERROR 13 FROM IESCRIO WHEN SENDING WITH MAP LIBP
Customer got following messages:
IESV0089I FOLLOWING MESSAGE(S) FROM PROGRAM 'IESLIBD', OFFSET X'274C'.
IESA1202I RECEIVED ERROR 13 FROM IESSCRIO WHEN SENDING WITH MAP LIBP.
IESV0089I FOLLOWING MESSAGE(S) FROM PROGRAM 'IESFPIP', OFFSET X'3CA4'.
IESA1202I RECEIVED ERROR 13 FROM IESSCRIO WHEN SENDING WITH MAP ADMSL.
This is mainly driven by the fact that during recovery process, the user map field USRMSAD is not cleared. |
PK27588
2006/07/07 |
UK16034 - 81A |
TRANSLATION ERRORS IN GERMAN SYSTEM
SIP$MSG, message 170 is invalid.
On panel TAS$SEC4 the variable for YES is used wrong (not changed to 1).
Some CICS Panel Helps words are cut after column 68.
On panel IESADMSL.IESGDEF there is a selection 9 shown. |
PK26887
2006/06/29 |
UK15825 - 81C |
IJSYSR1 LIBRARY HAS A RETENTION PERIOD OF 7 DAYS AFTER PTF APPLICATION.
After PTF application, IJSYSR1 has a retention period of 7 days. If a subsequent application is done within this period, overlap on unexpired file message will be issued.
Retention period of IJSYSR1 is 7 days, should be zero days. End of step instead of end of comment in SKBSTSAV. Query models used as default models in autoinstall. |
PK24287
2006/05/12 |
UK14212 - 81C |
PROVIDE BSTCNTL FILE MIGRATION UTILITY Migration tool BSTSAVER is used to migrate BSTCNTL file from z/VSE 3.1.1 to a newer release.
The program saves the contents of the file into a VSE library member which can be used on the new system to load the file.
The library member consists of BSTADMIN control statements.
|
PK21715
2006/03/24 |
UK12887 - 81C |
USER TRANSACTION DOES NOT WORK IF INVOKED BY REXX.
USER transaction does not work if invoked by REXX. IESDUSR only allows console id CNSL and m4lg, this should be extended to also allow console id REXX.
If transaction USER is issued from a REXX procedure by 'MSG xx,DATA=USER' command, there is no output received by the procedure. This is due to the fact, that the transaction checks for the console id. It will only work in case the console id is 'CNSL' or 'm4lg'. It also should allow 'REXX'.
In the procedure the console name used should be REXX: ACTIVATE NAME REXX PROFILE REXNOR |
PK20032
2006/02/24 |
UK12041 - 81C |
ABEND AEIZ IN AUTOINSTALL PROGRAM IESZATDX AFTER LONG TIME NOT RECYCLED.
Abend AEIZ occurred on a WRITEQ TS with APPLNAME. Since CICS was not recycled for a long time and TS is started warm, TS records accumulated.
Autoinstall program contained debug code writing to TS queue without reading or purging records. |
PK19519
2006/02/08 |
UK11519 - 81A |
DISPLAY STORAGE LAYOUT DIALOG DOES NOT WORK ON GERMAN SYSTEM.
There are no values shown for SVA size (24 bit) and all following. Caused by this fact, it is not possible to display storage values for another partition since the entry field for the partition is also overlayed. |
PK17362
2006/01/20 |
UK10909 - 81C |
IESUPDCF SHOULD SUPPORT PROGRAMMER ID TO BE UPDATED.
IESUPDCF does not allow to change the Programmer ID field, to change it, the dialog must be used. IESUPDCF should be extended to allow batch upgrade. |
PK17952
2006/01/18 |
UK10857 - 81E |
APPLICATIONS IN SELECTION PANEL IESADMSL.IESJDEF ARE NOT CORRECT.
On selection IESADMSL.IESJDEF, applications IESJSAM & IESJVTOC do not exist. The selection panel contains invalid application names. |
PK17213
2006/01/02 |
UK10441 - 81H |
MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced. |
PK17213
2006/01/02 |
UK10440 - 81E |
MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced. |
PK17213
2006/01/02 |
UK10427 - 81D |
MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced. |
PK17213
2006/01/02 |
UK10426 - 81A |
MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced. |
PK17212
2006/01/02 |
UK10425 - 81C |
MOVE UTILITY FROM HTF TO VSAM DOES NOT TELL IF DUPLICATE RECORDS WERE ENCOUTERED.
Customer had duplicate records on the source file.
He got message
MOVE SUCCESSFULLY COMPLETED; 009030 RECORDS WERE MOVE
but the target, a KSDS, only showed 8671 records.
He wanted a different message indicating that duplicate records where encountered. This duplicate records message will also be shown in case of a move into an existing KSDS cluster if records are to be replaced. |
PK15771
2005/12/01 |
UK09549 - 81C |
JOB ACCOUNTING ROUTINE SKJADACC SHOULD DEFINE VSAM CLUSTER.
Job accounting established with SKJADACC requires a VSAM file SMF.ACCT.FILE. This file should be defined within the skeleton. |
PK15356
2005/11/24 |
UK09359 - 81C |
RESOURCE SECURITY LEVEL MIGRATION SUPPORT.
New security concept introduced with PK10699 allows to define new security resources. Some of the new resources match the RSL type security of CICS/VSE. This APAR will provide migration support for RSL related security definition from CICS/VSE to the new security concept.
- Folowing resources can be migrated to the new security concept using CICS/VSE Migration Aid:
- Files (FCT)
- Journals (JCT)
- Programs (PPT)
- RCF authorized printers (TCT)
- Temporary Storage (TST)
This is done by skeleton SKRSLX2.
- Migration of resources defined in FCT, PCT, DCT, JCT, PCT, PPT or TST souces can be done using skleton SKRSLXS.
- Migration of resources defined in DFHCSDUP format can be done using sleleton SKRSLX3.
- Report of User Profile Maintenance has been enhanced to show the expiration date and the revoke date.
|
PK13189
2005/11/03 |
UK08648 - 81C |
LVTOC SHOWS WRONG FREE SPACE INFORMATION ON FAT DASD WITH MORE THAN 32K CYLINDERS.
- The List VTOC dialog does not show correct values for free space on volumes with more than 32k cylinders.
- Navigator shows wrong data for above devices and also for SCSI devices.
- VSAM backup dialog generates an unexpected continuation line.
- Minor errorr in job accounting routine.
|
PK13556
2005/10/19 |
UK08220 - 81C |
NEW SECURITY SUPPORT FOR Z/VSE 3.1.1.
After adding a list of resources to the FACILITY class, a user P001 was included on the access list for the resource DFHRCF.BRSL05
Then in IUI fastpath 281 option 9 was chosen.
In the following panel option 6 = ACCESS LIST was used for DFHRCF.BRSL05.
Pressing ENTER ends in X PROG 755. |
PK12885
2005/10/05 |
UK07819 - 81C |
INITIAL INSTALLATION FAILS WITH MESSAGE IESI0102 WITH EXACTLY 256 OR 257 DISKS CONFIGURED.
With 256 disk devices in IOCP, customer got message MSGIESI0102ASPECIFY IPLADD CMD FOR 54 DASD DEVICES TYPE AS SYSRES.
The logic seems to be wrong checking for minimum configuration. |
PK12555
2005/09/28 |
UK07648 - 81C |
COMMENTS FSU STAGE 2 INCORRECT.
At the end of Stage 2 of FSU, an invalid fastpath was shown in case of an FSU from 2.7.x or a 3.1 refresh. |
PK10701
2005/09/20 |
UK06614 - 81H |
NEW SECURITY SUPPORT FOR Z/VSE 3.1.1 (NLS).
New security concept support with Interactive Interface.
New dialog 'Security Maintenance' fastpath 28. |
PK10701
2005/09/20 |
UK06603 - 81E |
NEW SECURITY SUPPORT FOR Z/VSE 3.1.1 (NLS).
New security concept support with Interactive Interface.
New dialog 'Security Maintenance' fastpath 28. |
PK10701
2005/09/20 |
UK06578 - 81D |
NEW SECURITY SUPPORT FOR Z/VSE 3.1.1 (NLS).
New security concept support with Interactive Interface.
New dialog 'Security Maintenance' fastpath 28. |
PK10701
2005/09/20 |
UK06577 - 81A |
NEW SECURITY SUPPORT FOR Z/VSE 3.1.1 (NLS).
New security concept support with Interactive Interface.
New dialog 'Security Maintenance' fastpath 28. |
PK10699
2005/09/20 |
UK06576 - 81C |
NEW SECURITY SUPPORT FOR Z/VSE 3.1.1.
New security concept support with Interactive Interface. New dialog 'Security Maintenance' fastpath 28.
With this BSM control file the BSM does not only protect transactions (resource class name TCICSTRN), it also protects RSL resources with the resource class names ACICSPCT, DCICSDCT, FCICSFCT, JCICSJCT, MCICSPPT, SCICSTST, the logon to CICS as application by class APPL, and the general purpose class FACILITY (used for example by DITTO).
New security concept is defined and maintained using the BSTADMIN utility or using the Interactive Interface dialogs introduced with this APAR.
For more details see following books:
- z/VSE V3R1.1 Planning
- z/VSE V3R1.1 Administration
- CICS TS for VSE/ESA Security Guide, second edition
|
PK11714
2005/09/14 |
UK07222 - 81C |
PARAMETER IN CALL OF ARIPRPC PROCEDURE IS TOO LONG.
Introducing the DBNAME in the DB2 compile skeletons, the maximum length of the PARM operand was not considered. The parameters have to be reworked.
DB2 pre processor program ARIPRPx was issued with a parameter longer than 100 characters. |
PK08467
2005/07/07 |
UK05148 - 81C |
DFHSI1580D VE31CICS PLTPI PROGRAM SUPPDUMP HAS ABENDED, CODE AEIN.
If dump suppression is activated with skeleton SKSUPDMP, DUPREC condition comes up when CICS TS is started WARM or EMER if suppression is activated at PLT time.
CICS startup stops with message:
DFHSI1580D VE31CICS PLTPI program SUPPDUMP has abended,code AEIN.
Reply GO or CANCEL. |
PK06656
2005/06/02 |
UK04038 - 81C |
MESSAGE 'ORIGIN LARGER THAN END' ON PANEL IESFILCFRE DEFINING SPACE
In case of a 3 digit cylinder number for the ending extent on panel IESFILCFRE - Volume Free Space Information, the dialog issues message indicating that the origin of the desired allocation is lower than the end cylinder of the available extent. |
PK04698
2005/04/25 |
UK02709 - 81C |
OLPD DOES NOT HANDLE SRP SECOND OPERAND CORRECTLY. OPERAND AND PSW ANALYSIS IS NOT SHOWN.
OLPD tried to analyze the second operand of an SRP instruction which should not be the case.
PSW and operand analysis is not showing the related storage areas in all cases. |
PK02383
2005/03/21
|
UK01607 - 81C |
DELETE SKELETONS FOR LE LOCALES AND OS 390 API
After FSU, OS/390 API product and LE DBCS Locales are still installed on a version 2 level (products 06675V and 06675M if FSU from 2.7.x, or products 06665V and 06665M in case of an FSU from 2.6.x). Both products should be deleted before the z/VSE 3.1 version is installed.
Job DELTCPIP should not delete phases $SOCKLST, $SOCKOPT and $EDCTCPV.
On Japanese system, using an invalid key on panel Display System Activity will result in message IESA1201. |
PK01182
2005/02/21
|
UK00699 - 81C |
DISPLAY ACTIVE USER LIST INCORRECT AFTER NODE ERROR (DFHZNAC)
Terminating the Display Active Users dialog using the emulation disconnect function (via node error program), after signing on again, all users are displayed twice.
This is due to the fact that the recovery function of IESDUSR works with the terminal id retrieved from the EIB, the EIB however is already cleared.
1. Using a zero terminal id leads to the fact that TS storage does not get freed after a terminal error (DFHZNAC).
More over, if CSNE is defined with TASKDATALOC(ANY), recovery processing for IUI fails with abend AEZC, thus main purpose of the recovery process like freeing allocated storage does not take place.
2. Some CICS Listener Definition Panels (Transaction EZAC) do not correctly display the port number defined for a CICS Listener, if this port number is greater than 32768 (instead of the correct port number, a number smaller than 32768 is displayed).
The same problem exists for the EZACIC02 listener (transaction EZAL) when issueing EZY messages that include port numbers in their text.
1. In following routines, the recovery process was changed:
IESBQUR Batch Queue Maintenance
IESDUSR Display Active Users
IESIMSG Retrieve Message from ICCF
IESLQDP Display Message Log
IESNEWS Maintain News Record
IESVTOCR Display VTOC
IESXSYN Maintain Synonym Table
INWMPRIN Print HTF Member
INWMRXS1 HTF fulist
INWMRXS5 Move file HTF to ICCF
INWMSHAR HTF share a file
2. Ensure display of correct port numbers. |
PK01123
2005/02/21
|
UK00689 - 81C |
SUPPRESS OLPD SCREEN FOR ABENDS AZCT AND ATNB
After a time out happened using DITTO edit function, abend AZCT followed by an ATNB is issued. For both abends, OLPD should not try to send any data to the terminal thus suppress the display of the OLPD user screen. |
